Surge protector
AC Data Systems, Inc. ("AC Data
Systems") custom designs, manufactures
and markets modular transient voltage surge suppression ("TVSS")
devices. The Company is committed to providing its customers with the
best protection at the best price. Innovative modular surge suppression
systems allow for simple field repairs, retrofits, and upgrades.
As signal delivery and other data systems become more and more
dependent on microprocessor technology, and as microprocessor
technology continues to advance, the systems are more and more
sensitive to over-voltage conditions. Significant voltage spikes can
completely destroy microprocessors, while less severe spikes may cause
cumulative damage that results in the eventual failure of the system.
AC Data Systems products reduce the effect of an over-voltage condition
by clamping off the excess voltage and shunting it away from the
sensitive equipment.
AC Data Systems has adopted a
design-for-quality approach to product
development. Design-for-quality simply means: "It’s a defect if the
customer doesn’t like it." Products are formulated based on customer
requirements and AC Data Systems is committed to providing total
customer satisfaction. Quality is maintained through a dynamic quality
assurance program designed to meet ISO 9000 standards.
*AC Data Systems, Inc.
806 W. Clearwater Loop Suite C
Post Falls, Idaho 83854
USA
Tel: +1 (800) 890-2569
+1 (208) 777-1166
Fax: +1 (208) 777-4466
E-mail: info@acdatasystems.com
http://www.acdatasystems.com
#
Advanced Electronics - Manufacturer of surge protection for industrial,
commercial and residential electrical service.
The Clean Power® product line
incorporates three very important
concepts that founded and revolutionized the Surge Protection Device
industry.
First, we encapsulate our Clean Power®
surge protection components in a
chemical epoxy. As early as 1974, surge protection devices were
manufactured fully encapsulated in a chemical epoxy. This unique
formula not only protects the individual components in the SPD, but it
also absorbs and dissipates the heat produced as the SPD responds to
transient activity. This encapsulant has been proven for over 25 years
to extend the life of the surge protection device-AND-just as
importantly, the life of the equipment that it protects.
Secondly, and equally as impressive, Advanced Electronics, Inc.
implements the Clean Power® "systems coverage" philosophy. Our
experience shows that the most effective means of transient suppression
is "front line protection" applied on the entrance level electrical
panels themselves, followed by sub-panel and point-of-use devices on
Tel: lines, cable runs, and individual pieces of equipment.
Thirdly, our Clean Power® True All Mode protection technology (10-mode
on three phase wye) reflects the opinion of some of the finest
engineering minds in the surge protection industry. The Clean Power®
True All Mode products offer superior non-degrading protection
capabilities and are backed by our unprecedented 25-year product
warranty.
In summary, Advanced Electronics, Inc. produces quality products and
offers quality service to our customer base. We were doing this long
before Surge Protection ever became a viable industry. Last but not
least, Our Non-Negotiable Rule is "TO SERVE".
There are three things that must be done right in order to have a good
surge protection installation: (1) the right product, (2) the right
placement, and (3) the right installation. Advanced Electronics, Inc.
excels in all three!
Our Clean Power® product line is manufactured to the highest standards
in our industry and we offer our customers over fourteen years of
hands-on experience in surveying and working hand-in-hand with
engineers and electrical maintenance departments to ensure the correct
application and proper placement of our products.
*Advanced Electronics, Inc.
6801 Harrison Park Drive
Harrison, Tennessee 37341-1210
USA
Tel: +1 (423) 344 9151
Fax: +1 (423) 344 8780
E-mail: info@ae-cleanpower.com
http://www.ae-cleanpower.com
#
Advanced Lightning Technology - Manufacturers of grounding and
lightning protection equipment.
ALT was formed in 1987 as a provider of grounding and lightning
protection components. Prior to that time, if contractors did not
specify exact part numbers when searching for grounding and lightning
protection components, they were out of luck. To meet that industry
need, a company was formed by a group of determined individuals who had
experienced the trenches installing grounding and lightning protection
systems, and could offer unrivaled customer service. The founding
philosophy remains true today, a fierce commitment to customer service
is as good as our word! Since 1999, ALT has exploded into the custom
metal fabrication industry offering the most innovative solutions for
custom engineering challenges.
ALT exists to serve the
telecommunication, electrical and construction
industries by offering state of the art custom metal fabrication, and
the highest quality products at competitive prices while maintaining an
obsession with customer service.
Our manufacturing facility and corporate office complex is nestled in
the majestic oak trees of North Central Texas, privately located on 113
acres of undisturbed quiet country land in Argyle, Texas.
Our manufacturing operations produce custom metal fabrication to order,
and provide quality parts and equipment to the wireless communication
and electrical industries under the most demanding schedules. Our staff
of certified welders and inspectors continuously produces products
which are known for setting industry standards for quality and
availability.
We carry UL Listed components which undergo regular inspection by
Underwriters Laboratories, Inc. These products meet or exceed UL96A,
UL96, NFPA780 and LPI175 lightning protection standards. We incorporate
these impeccable standards of quality and dependability in all other
product lines as well. Our pledge is our word. Our word is to provide
the best customer service possible. Your total experience is
satisfaction guaranteed.
*Advanced Lightning Technology
San Antonio
6690 Tri-County Parkway
Schertz, TX 78154
USA
Tel: +1 (800) 950-7933
Fax: +1 (940) 455-2817
E-mail: sales@altfabrication.com
http://www.advancedlightning.com
#
Advanced Resources International - Manufacturer of surge protectors for
commercial, residential and industrial applications.
*Advanced Resources Intl.
928 Broadwater
Billings, MT. 59101-2700
USA
Tel: +1 (406) 256-4932
Fax: +1 (406) 248-7235
E-mail: joe@surgepure.com
http://surgepure.com
#
Citel - Manufacturer of surge protection equipment suppressors for AC
power lines, datacom and teleTel: equipment. Surge arrester gas tubes
protect against lightning surges and electrical transients.
CITEL manufactures a complete line of surge protectors for AC power,
telephone, data and RF coaxial lines. CITEL surge suppressors have been
especially designed to provide an effective solution to Broadband
Wireless, Telecom, Automation Control Instrumentation and Security
Market industries.
CITEL surge protection devices are ideal to protect PBXs, Telecom
equipment, Radio Base Stations, GPS, Wireless systems and cellular
sites against lightning surges and electrical transients. They are also
ideal to protect PLCs, MUXs, HUBs, RTUs, SCADA, THCs and Telemetry
systems against power surges.
Many models are available for 4-20 mA loops, RS232, RS422, RS423,
RS485, T1/E1, ISDN, 56k/DDS, leased lines, teleTel: lines as well as
coaxial cable and twisted pairs. They come for DIN rail, panel mount or
directly plug-in to the equipment to be protected. I/O connections can
be made either via screw terminals or DB9, DB15, DB25 connectors or
RJ11, RJ45 jacks. Our coaxial lightning arrestors feature also all
types of connectors such as N, BNC, TNC, SMA, 7/16 DIN and F type.
Most of CITEL surge protectors use a state of the art heavy-duty
multistage design that combines a fast response time and a high power
handling capability. They will contribute to expand equipment life span
and will eliminate costly downtimes. CITEL surge suppressors
automatically reset after each surge and are maintenance free. Under
the most severe conditions, the surge protector will fail short leaving
your equipment fully protected.
CITEL is a worldwide leader manufacturer of surge arrester gas tubes
and provides a complete line of gas discharge tube components from 75V
to 2500V available for surface mount and through hole mounting.
Most of CITEL surge suppressors have been approved by all major
international organizations like UL, CE, VDE, and private corporations
like ALCATEL.
*CITEL, Inc.
1515 N W 167th Street
Suite 5-223
Miami, FL 33169
USA
Tel: +1 (800) 248-3548
+1 (305) 621-0022
Fax: +1 (305) 621-0766
E-mail: citel@citelprotection.com
http://www.citelprotection.com
#
Current Technology - Manufacturers surge suppression filter system
products.
For more than a quarter century, engineers and power users have
confidently relied on Current Technology surge suppression filter
system products to safeguard their facilities' systems from the
damaging effects of electrical power surges.
Current Technology® products are designed, manufactured and marketed by
Danaher Power Solutions, a subsidiary of Danaher Corp. (NYSE: "DHR")
which has 18,000 associates in more than 20 countries around the world.
Our customers are supported by our worldwide network of more than 175
factory-trained representatives serving the protection needs of
commercial, industrial, communications, government, military,
education, retail, healthcare and transportation industries.
Engineers and end-users with zero tolerance for downtime, data corruption or
equipment damage resulting from route or catastrophic electrical disturbances have made
Current Technology the #1 name in surge suppression. Current Technology's "24x7"
Technical Hotline provides around the clock technical installation and maintenance support
24 hours a day, 365 days per year.
Innovative Surge Suppression Solutions for Power Users
Current Technology has earned the industry's most respected reputation
through breakthrough engineering innovations, superior product
performance and the industry's best technical support. Current
Technology manufactures these and other industry-leading products .
MasterMind™ Monitoring System
MasterTest™ Monitoring System
MasterPlan® Total System Solution
SELect (TM) Suppression Filter Systems
TransGuard™ Suppression Filter Systems
EGPE® Electronic Grade Panelboard Products
Harmonix™ Active Harmonic Cancellation Filter
ControlGuard® Suppression Filter Systems
GuardBus® Suppression Filter Systems
Current Technology developed the industry's first integral 10-mode test
point that provides end-users with convenient, ongoing ability to
verify suppression filter system reliability and performance. Only
Current Technology products include Seamless™ Technology, the
proprietary design concept that integrates and maximizes the combined
performance capabilities of up to four major elements to produce the
industry's best suppression and highest tested single pulse surge
current capacity ratings.
No other industry manufacturer offers the proven benefits of including
selenium, a naturally occurring element, in their electrical transient
protection product offerings. The results: unmatched performance and
dramatically extended reliability. Other revolutionary designs include
the Integrated Suppression Bus™ (patent pending), Electronic Grade
Panelboard®, ControlGuard® and design philosophies that ensure ongoing
product reliability.
*Current Technology
3001 West Story Road
Irving, TX 75038-3058
USA
Tel: +1 (972) 252 4400
+1 (800) 238 5000
Fax: +1 (972) 252 7705
E-mail: info@currenttechnology.com
http://www.currentechnology.com
#
Ditek Corp. - Manufacturing surge protectors with on line catalog and
shopping cart.
DITEK's product quality does not change by product or price point. The
features may change, but quality is consistent. This is our philosophy.
From DITEK's top of the line large industrial products to our smallest
modular products, quality is the top priority.
This top priority is evidenced by the quality recognition DITEK has
received from companies like Honeywll, Sprint, Lucent Technologies,
Intertel, Panasonic, IBM and Compaq.
*DITEK
One DITEK Center
1720 Starkey Rd
Largo, FL 33771
USA
Tel: +1 (800) 753-2345
+1 (727) 812-5000
Fax: +1 (727) 812-5001
E-mail: contact@ditekcorp.com
http://ditekcorp.com
#
Eclips Professional Technical Systems - A major designer, manufacturer,
and consulting experts in the field of TVSS (transient voltage surge suppression)
*Professional/Technical Systems, Inc.
3900 A 31st. Street N
St. Petersburg, FL 33714
USA
Tel: +1 (727) 525-5552
+1 (800) 526-1556
Fax: +1 (727) 526-2990
E-mail: jsherry@eclipspts.com
http://www.eclipspts.com
#
Elec-Saver Corporation - Manufacturers of transient voltage surge
suppressor.
In the mid-1990's, Mr. Tony Suzuki, our Chairman, began a consulting
business for manufacturers in Asian countries (China, Thailand,
Malaysia, etc.)
During this period, many manufacturers in the United States, Japan, and
Europe moved their factories to the Asian region to remain competitive
in their industries.
Through Mr. Suzuki's experience, we learned that one of the biggest
issues to be resolved was the instability of the electrical supply for
production in these countries.
In January of 1998, in order to satisfy the huge demand from industries
for power quality, protection, and energy savings products, Mr. Suzuki
established the Elec-Saver Corporation in the United States and
initiated production and export of the Elec-Saver Transient Voltage
Surge Suppressor. This device was chosen because it utilized advanced
technology developed in the United States more than 20 years ago.
Since that time we have been resolving the problem of unstable
electrical supplies for our customers as a part of our consulting
business.
In July of 2000, we decided to go a step further and separate the
marketing of Elec-Saver from the consulting business. The primary
reason was to increase knowledge of the Elec-Saver product with a
larger, more varied customer base. In fact, it is possible that you
may not be familiar with the Elec-Saver product. While we are not well
known in the consumer marketplace many of our units have been used by
companies throughout Asia and our performance has been proven in
multiple applications.
*Elec-Saver Corporation
3848 Del Amo Blvd, #322
Torrance, CA 90503
USA
Tel: +1 (310) 921-2283
Fax: +1 (310) 921-2449
E-mail: info@elec-saver.com
http://www.elec-saver.com
#
Electronic Specialists, Inc. - Manufactures protectors and interference
filters for computers, modems, video, audio and industrial equipment.
Electronic Specialists, Inc
75 Middlesex Avenue
Natick, Massachusetts 01760
USA
Tel: +1 (508) 655-1532
Fax: +1 (508) 653-0268
E-mail: esp@elect-spec.com
http://www.elect-spec.com
#
General Telecom, Inc. - Manufacturer of grounding equipment and wire
screen partitions for the telecommunications industry.
General Telecom would like to have the opportunity to meet your needs,
whether it is supplying ground bars and equipment or installing and
maintaining communication shelters. The staff at General Telecom is
confident if given the chance that we will prove ourselves to be
timely, economical, ethical, and professional. We take pride in our
ability to satisfy our customers and we have a proven track record of
correcting any problems or issues before they become critical.
*General Telecom, Inc.
1000 Powder Plant Road
Bessemer Al 35022
USA
Tel: +1 (205) 428-8455
Fax: +1 (205) 428-7355
E-mail: joe@gtitech.net
http://www.gtitech.net
#
Heary Bros. - Engineers, designers and manufacturers of lightning
protection systems for buildings, factories and homes worldwide.
Our Lightning Products Span the Globe. We are global leaders in
lightning prevention technologies with over 150,000 installations
worldwide. Check out our industry-leading technology solutions on the
lightning product summary page, and the detailed information in our
lightning product and accessory catalog.
A Sampling of Our Recent Installations Our lightning prevention
systems are installed on thousands of buildings and structures across
the United States. Check out these notable sites.
Product Specifications and Installation Drawings Our Ellipsoid System
10000 is designed for professional or do-it-yourself installation. Read
and download the component lists, installation drawings, and
architectural specification documents, using Adobe Acrobat Reader.
Our Engineering and Consulting Services We also offer specialized CAD-
CAM design, engineering, and consulting services for architects,
engineers, and property owners.
*Heary Bros. Lightning Protection Co.
Inc.
11291 Moore Road
Springville NY 14141
USA
Tel: +1 (716) 941 6141
Fax: +1 (716) 941 3828
E-mail: mailbox@hearybros.com
http://www.hearybros.com/english
#
Innovative Technology, Inc. - Manufacturer of transient voltage surge
suppression equipment.
Since 1980, Innovative Technology has specialized in solving the most
difficult electrical transient problems for business, industry,
government and defense sectors.
Innovative Technology pioneered Active Tracking Network (ATN), the
unique hybrid network design incorporating a variety of components to
address the entire spectrum of transient problems. I.T.'s Active
Tracking Network (ATN) is the industry's most effective method to
protect sensitive electronic equipment. As a technology leader,
Innovative Technology remains active in key national and international
electrical and TVSS standards such as the Institute of Electrical and
Electronics Engineers (IEEE), Underwriters Laboratories (UL) Industrial
Advisory Group, International Electro Technical Commission (IEC) and
NEMA Technical Committees.
Innovative Quality, ISO9001.
At Innovative Technology quality is designed and built into every
product. Innovative Technology's Quality System is certified by the
British Standards Institute, recognized worldwide as the foremost
accreditation and certifying body.
Innovative Technology products are UL 1449 2nd Edition listed as
transient voltage surge suppressors. I.T.'s lab is authorized by a
nationally recognized testing laboratory (NRTL) to conduct testing to
UL 1449 and UL 1283 standards. As such, new and existing product
designs are subject to rigorous examination at the factory.
*Innovative Technology, Inc.
15470 Flight Path Drive
Brooksville, FL 34604
Tel: +1 (800) 647-8877
+1 (352) 799-0713
Fax: +1 (352) 796-0316
E-mail: salesinfo@itvssprotector.com
http://www.itvss.com
#
ITW Linx - Engineering and manufacturing of custom surge protectors for
AC, telecom and wireless applications.
ITW Linx has been manufacturing products for the telecommunications
market for over 20 years. In 1982, Linx worked with an engineer from
GTE to develop the first 66 block overvoltage protection product. At
the time, GTE was hand wiring the solid state overvoltage devices on 66
blocks. This method was time consuming and left the electrical circuit
vulnerable to disconnection and mechanical failures. Since ITW invented
the 66 block bridging clip, the circuit ideas of GTE with the product
design, engineering, and production capabilities, Linx created the very
first 66 block solid state overvoltage protector, which was introduced
to the market in 1983. Since then, ITW Linx has been the first in the
industry with a number of protection products for telecom and datacom
like the CAT5 and CAT5e protection families.
We have an engineering team in the US devoted to designing and testing
to the toughest standards in the industry. We have manufacturing
facilities in the US and China to minimize our time to market and
maximize our global presence.
ITW Linx offers a full line of lightning and surge protection products
covering the breadth of the AC, telecom and datacom markets. From rack
mount solutions to pair by pair block protectors, we provide protection
solutions from the most basic system, up to the latest technology. Our
current protection families include UltraLinx (110 and 66 block
protection), DataLinx (CAT5/CAT5e/CAT6 Primary Protection), TeleLinx
(Building Entrance Protection), TowerMAX (Premier Telecom Surge
Protection), RacMAX (Rack Mounted Surge Protection) and MAX (Premier AC
Surge Protection).
*ITW Linx
7301 West Ainslie Street
Harwood Heights, Illinois 60706
USA
Tel: +1 (800) 336 LINX
Fax: +1 (708) 667 3490
E-mail: sales@itwlinx.com
http://itwlinx.com
#
Kumwell Lightning Technology - Manufactures lightning protection,
grounding systems, exothermic welding, electrical connections and
grounding.
Since 1996, K.M.L. TECHNOLOGY CO.,LTD. has been the manufacturer and
distributor lightning protection equipment and grounding exothermic
welding. We have experiences of these markets including mould design
for special cases. We do export the products internationally.
We strive to stay on the cutting edge of technology, We use only the
finest materials in the manufacturing process. You can be assured that
all of the parts been casted, formed, or stamped high quality control.
We truly believe in customer satisfaction.
We constantly monitor customer service, especially response time. It is
KUMWELL's ultimate goal to ensure that our customers receive the
highest quality service in the time frame that must fit to customers'
requirements.
*K.M.L. Technology Co., Ltd.
USA
Tel: +1 (662) 954-3455
Fax: +1 (662) 591-7891
E-mail: info@kumwell.com
http://www.kumwell.com
#
Lightning Prevention Systems, Inc. - Manufacture and install static
dissipation systems: grounding, surge protectors, and site inspections.
Lightning protection for homes, buildings, towers, factories, petro
facilities, and boats. Includes educational lightning
We are the premier company that offers advanced products and services
to protect today's structures from lightning. We offer a turnkey
operation of design & products and the capabilities of performing
installations. Our reputation has been built on professionalism,
customer service, quality products, excellent workmanship, and
technical know how. We leave our customers at ease with fast turn
around design, estimating, and neat professional installation work.
Therefore, you or your customers will feel confident and satisfied with
the service they will receive over their investment.
*Lightning Prevention Systems, Inc
424-A Kelley Drive
P.O. Box 353
West Berlin, NJ 08091
USA
Tel: +1 (856) 767-7806
Fax: +1 (856) 767-7547
E-mail: info@lpsnet.com
http://www.lpsnet.com
#
Founded in 1994, HyperLink Technologies is an industry leader in the
development, manufacture, and marketing of extended range wireless LAN
and Wireless Internet systems. HyperLink offers a wide line of products
ranging from bi-directional amplifiers and wireless LAN antenna systems
to custom cable assemblies and connectors.
Through direct sales and strategic technological partnerships with
leading telecommunications equipment manufacturers and international
distributors, HyperLink serves a diverse commercial and government
customer base worldwide and is able to offer complete, high performance
wireless LAN solutions for commercial, government, and military
applications.
*HyperLink Technologies
1201 Clint Moore Road
Boca Raton FL 33487
USA
Tel: +1 (561) 995-2256
Fax: +1 (561) 995-2432
E-mail: sales@hyperlinktech.com
http://www.hyperlinktech.com/web/about.html
#
Maida Development Company - Manufacturers of zinc oxide varistors,
multi-layer varistors, PTC and NTC thermisitors, and ceramic disk
capacitors.
For over 52 years the Maida Development Company has been a leading
manufacturer and supplier of high quality components for the electronic
industry. Maida currently has three full product lines, consisting of
zinc-oxide varistors, ceramic disk capacitors, and PTC and NTC
thermistors. From its founding in 1947 by Francis X. Maida, the
corporate offices and manufacturing facilities for Maida are located in
Hampton, Virginia, where today it encompasses over 100,000 square feet
of space.
Maida products are distributed worldwide to OEMs and end-users who
require exceptional service and delivery. Distribution is achieved with
an international team of trained, experienced sales representatives and
distributors strategically located worldwide. Maida products are
shipped to customers in North America, Central and South America,
Europe, and Asian countries including Korea, Taiwan, China, Malaysia,
and Singapore.
Component products manufactured by Maida cover a wide range of uses and
industries. Maida's zinc-oxide varistors are used in many applications
that require protection against transients induced by lightning struck
power lines. They also provide protection for suppression of transients
caused by switching inductive loads from transformers, relays and
coils. Common applications include ground fault interrupters, specialty
high-voltage power supplies, telecommunication equipment, computer and
computer-related products, motor control systems, cable TV systems, and
AC smoke detectors, plus many special applications.
The Maida manufactured products include a complete line of radial-
leaded ceramic zinc-oxide varistors along with a line of surface mount
monoblock and multilayer varistors. Maida also manufactures a complete
line of high voltage ceramic disc capacitors, complemented by a full
selection of safety capacitors. NTC ceramic thermistors used for in-
rush current limiting and temperature sensing applications as well as
PTC thermistors for over-current protection are also parts of the
product line-up at Maida. Custom design and fabrication of components
for specific customer requirements are also available from Maida.
Maida products are component-recognized in the United States as well as
internationally by organizations such as UL, CSA, VDE, SEMKO, NEMKO,
DEMKO, FIMKO, and SEV.
*Maida Development Company
20 Libby Street
Hampton, Virginia 23663
USA
Tel: +1 (757) 723-0785
Fax: +1 (757) 722-1194
E-mail: sales@maida.com
http://www.maida.com
#
Meter-Treater, Inc. - Manufacturer of surge protective devices meter-
based surge suppressor for residential, commercial applications as well
as for signal, data and teleTel: interfaces.
The original Meter-Treater®, invented in 1986, was designed as a meter-
based Surge Protective Device that could be marketed to residential
customers. Over the years Meter-Treater, Inc. has earned a reputation
for quality products and friendly, responsive customer service.
Today, Meter-Treater, Inc. manufactures quality Surge Protective
Devices for Residential, Commercial and Industrial applications which
now includes a comprehensive line of Protectors for Signal, Data and
telephone Interfaces.
Our mission is to provide our customers
with functionally engineered
products that deliver value, quality and safety throughout their
operational life. To these objectives, we at Meter-Treater, Inc. are
totally committed.
*Meter-Treater, Inc.
1349 South Killian Drive
Lake Park, FL. 33403
USA
Tel: +1 (800) 638-3788
+1 (561) 845-2007
Fax: +1 (561) 848-2372
E-mail: kbowen@metertreater.com
http://www.metertreater.com
#
NexTek, Inc. - Produces coaxial surge suppressors in N, 7-16 and other
connectors. Frequencies to 6 GHz for 802.11 for Telecom, commercial and
military. Gas tube, quarter-wave and bias T products.
In 1986, NexTek was founded to supply EMI/EMC solutions to the
electronics industry. Serving the communications, aviation, computer,
military, and medical electronic industries, NexTek's goal is to solve
customer EMC challenges with cost-effective, high-quality, high-
performance products and service.
Superior performance and value are combined to provide industry-leading
products. Proven supplier relationships result in long-term pricing,
quality, and delivery performance.
Total customer satisfaction continues to be our first priority.
*NexTek, Inc.
P.O. Box 385
439 Littleton Road
Westford, MA 01886
USA
Tel: +1 (978) 486-0582
Fax: +1 (978) 486-0583
E-mail: nextek@nexteklightning.com
http://www.nexteklightning.com
#
Northern Technologies, Inc. - Manufacture and offers surge protection
and UPS devices for AC and DC, coaxial, telco and dataline electronic
equipment.
*Northern Technologies, Inc.
USA
Tel: +1 (509) 927-0401
+1 (800) 727-9119
Fax: +1 (509) 927-0435
E-mail: webmaster@northern-tech.com
http://www.northern-tech.com
#
Sankosha Corporation - Manufacturer of gas discharge tubes for surge
protection with an online catalog of these protectors.
Sankosha Corporation manufactures various protective devices and
related equipment for power lines, communication lines, signal lines
and data transmission lines. These devices prevent serious damage from
abnormal surges in voltage or current caused by lightning and/or power
plant accidents.
Sankosha Corporation also manufactures SAN-EARTH, a conductive material
used in construction to lower resistance to grounding, Airway
Obstruction Lights, and other safety related products for supply to
Power Companies, Telephone Companies, Communication Equipment
Manufacturers and Transmission Equipment Manufacturers.
*Sankosha U.S.A., Inc.
406 Amapola Avenue, Suite 135
Torrance, California 90501
USA
Tel: +1 (310) 320 1661
Fax: +1 (310) 618 6869
E-mail: info@sankosha-usa.com
http://www.sankosha-usa.com
#
Tesco-Online - Manufactures surge and lightning protection equipment
for protection for A/C power and communication systems.
*Tesco-Online
8800 SE Sunnyside Rd. Suite 215-N
Clackamas, OR 97015
USA
Tel: +1 (800) 426-2826
Fax: +1 (503) 654-9181
http://www.tesco-online.com
#
Tytewadd - Manufactures secondary surge and lightning arresters.
The term "surge arrester" is frequently misused to describe those small
devices designed to be plugged into one outlet to protect only that one
circuit. The proper term for such devices is TRANSIENT VOLTAGE SURGE
SUPPRESSOR which, under UL 1449 standards, is not required to satisfy,
as is the SECONDARY surge arrester, UL criteria for overvoltage
conditions caused by lightning.
Tytewadd Power Filters are superior secondary surge and lightning
arresters which passed ANSI/IEEE C62.1 standards, exceeding the
required 10,000 amp surge by withstanding an induced surge of 15,000
amps.
TYTEWADD units are uniquely different in concept and construction: they
are UL listed and CSA certified for installation Inside electrical
entrance (service) panels to protect all, rather than just one, of the
circuits in a home or business. The design configuration of these units
enables them to recycle and dissipate, in 1.5 nanoseconds, over voltage
conditions of less than 10% above the rated current entering a premise,
as well as those lightning induced surges of 15,000 amps or less. In
other words, TYTEWADD POWER FILTERS literally readadjust electrical
service disrupted by overvoltage conditions known as "surges and
spikes" and instantaneously restore that service to normal.
The performance of surge arresters is determined by two basic factors:
the clamping capability (a term used to describe the level at which a
unit begins to suppress and dissipate surges); and "response time"
(literally how fast in terms of time a unit can respond to the surge
and begin "clamping" it off or readjusting the current to the voltage
provided by the utility.) One nanosecond is one billionth of a second,
and is the measurement of electricity in light feet per second. To
better comprehend such speed, consider one nanosecond as a wire 11.8
inches long.
Many surge protection devices claim response times of five
or more nanoseconds. This means that overvoltages will be 59 inches
past those surge arresters or suppressors and into equipment before
they begin to react. Inasmuch as the breakers in an electrical panel
react in approximately 3 million nanoseconds, it should be apparent
that electrical forces traveling at the speed of light can cause
serious damage given these extra fractions of seconds.
*Tytewadd Power Filters
704 West Battlefield
Springfield, MO 65807
USA
E-mail: tytewadd@aol.com
http://www.tytewadd.com
#
Zero Surge - Manufacturer of surge suppression equipment.
What makes ZeroSurge products unique and superior?
No surge related failures or degradation.
No downtime risks.
Our patented series mode technology suppresses not only surge voltage,
but surge current and surge duration, providing total surge protection.
A source of audio and video noise is eliminated because surges are not
sent to your ground line, keeping it clean for interconnected equipment
In addition to surge suppression, our filter technology removes the
power line noise that can degrade audio/video signals
No MOVs assures safety and provides "peace of mind"
Performance and endurance is certified by UL’s special adjunct
classification program (B3/C1 Surge: 6,000V, 3,000A)
Total customer satisfaction.
In business since 1989, Zero Surge products have withstood the test of
time (no surge induced failures in 14 years) and every unit is 100%
computerized surge tested as part of our quality assurance program.
*Zero Surge Inc.
889 State Route 12
Frenchtown, NJ 08825
USA
Tel: +1 (800) 996-6696
Fax: +1 (908) 996-7773
E-mail: info@zerosurge.com
http://www.zerosurge.com
Internet guide
Art
| Business | Computer | Debt | Domain names | Finance | Health | Games | Home | Insurance | Jobs | Mortgage | News | Recreation | Science | Shopping
Sports | Travel | Webhosting | Webmasters
