Substation and Transmission
Alstom T&D Protection & Control -
Manufacture of protection, control,
recording and monitoring systems for electrical transmission and
distribution networks.
ALSTOM EAI systems for the generation, transmission, distribution, and
marketing of electric power can be found throughout the world. The
company prides itself on innovative technology, systems integration,
and project management expertise and boasts a peerless delivery record
for on-time deliveries.
USA-based ALSTOM EAI develops software and integrates systems serving
markets in the USA, Australia and New Zealand while ALSTOM EAI (Massy)
markets control systems products, energy management software and
turnkey solutions from its headquarters in France to utilities in the
rest of the world. Products are integrated into existing systems
through a strategic partners licensing program, or supplied as turnkey
projects.
*Alstom T&D Protection & Control
11120 NE 33rd Pl.
Bellevue, WA 98004
USA
Tel: +1 (425) 822 6800
+1 (800) 736 4913
E-mail: info@esca.com
http://www.tde.alstom.com/p-c
#
Cardinal Pumps - Manufacturer of transformer oil valves, transfer oil
pumps for transformers and re-manufactured pumps.
Cardinal Pumps and Exchangers, Inc. commenced operations in 1961 as
Cardinal Development Corporation. Since that time, Cardinal has built
a solid reputation as being North America's premier designer and
manufacturer of transformer oil Pumps.
We are a major supplier to both O.E.M. transformer manufacturers and
utilities, with a proven track record of many thousands of pumps in
service worldwide.
In addition to pumps, we design and manufacture transformer oil
Valves, and provide the highest quality re-manufactured pumps. Re-
manufacturing offers the latest engineered bearing design to the same
tolerances as new pumps, and with a new pump warranty.
*Cardinal Pumps and Exchangers
1332 Salem Parkway
Salem, OH 44460
USA
Tel: +1 (330) 332-8558
Fax: +1 (330) 332-1560
E-mail: unifin@kochind.com
http://www.cardinalpumps.com
#
Crossarm, Inc. - Manufacturers of composite polymer products for the
power distribution industry.
CROSSARM, Inc. was established in march of 1998 and is located in
Gainesville, Texas.
We are manufacturers of high quality composite polymer parts for the
electrical power distribution industry.
We manufacture crossarms, braces, stand-off brackets and numerous
other standard and custom molded parts for this industry.
All of our standard components have been fully tested by EPRI and are
certified to a BIL of 450 with standard insulators.
Components are manufactured using our patented composite polymer
material. The use of this material enables us to achieve remarkable
electrical characteristics while maintaining structural integrity,
flexibility and durability.
CROSSARM, Inc. can provide you with our standard electrical components
or can custom mold any part to meet your specific needs.
*CROSSARM, Inc.
1710 Westair
Gainesville, TX 76240
USA
Tel: +1 (877) 877 0857
Fax: +1 (940) 665 8991
E-mail: crossarm@crossarm.net
http://www.crossarm.net
#
Eco Electrical Systems, Inc. - Manufacture of products that help
prevent raptors, eagles, hawks, and animals from being electrocuted on
high voltage power circuits.
Eco Electrical Systems engineers and manufactures bird guard and
wildlife protective products. The conductor covers and deterrents are
used on overhead distribution poles to protect birds of prey or
eagles, hawks, owls, and other avian species from being electrocuted
or injured on high voltage power lines.
Utilities have been designing and constructing distribution circuits
for nearly a century, utilizing wood, steel, concrete, and composite
poles. These poles provide a perch for birds to hunt for prey. These
poles support the wires or conductors that distribute the power needed
for our everyday lives. When a raptor, or bird, comes in contact with
one of these energized wires and ground, an insulator, or comes in
contact with two of these energized wires simultaneously the result is
usually fatal to the bird and results in an outage for the utility.
The Department of Justice recently ruled that under the Migratory Bird
Treaty Act and the Bald and Golden Eagle Protection Act a utility
whose equipment electrocutes federally protected birds could face
criminal prosecution.
At Eco Electrical Systems we work together with utilities, wildlife
biologists, engineers, line personnel, and manufacturers to design
bird guard and wildlife protective products that will help prevent
electrocutions.
*Eco Electrical Systems, Inc.
USA
Tel: +1 (775) 828-3301
Fax: +1 (775) 853-8615
E-mail: info@ecoelectrical.com
http://www.ecoelectrical.com
#
Edison Controls F.C.I - Manufacture a variety of products designed to
indicate or locate faults on electrical utilities overhead or
underground distribution circuits.
Welcome to Edison Controls F.C.I.'s home on the world wide web. We
manufacture a wide variety of products designed to indicate or locate
faults on electrical utilities overhead or underground distribution
circuits. Faulted circuit indicators are designed to minimize
restoration time by providing a visual indication for the affected
circuit.
Our original product line consist of proven line powered faulted
circuit indicators. Our faulted circuit indicators are used by REA's
public and investor owned utilities everywhere. Hundreds of thousands
of units are in service worldwide. Edison Controls F.C.I., Inc. has
the experience, technology and manufacturing capacity to respond to
the needs of the power industry.
*Edison Controls F.C.I., Inc.
P.O. Box 2095
Fairhope, Alabama 36533
USA
Tel: +1 (800) 328-5833
+1 (334) 928-3114
Fax: +1 (334) 928-2355
E-mail:sales@edconfci.com
http://www.edconfci.com
#
Electro Industries - Manufacturers power monitoring, advanced power
quality, revenue metering, substation data acquisition and control
that is web based.
Founded in 1973 by engineer and inventor Dr. Samuel Kagan, Electro
Industries/GaugeTech changed the face of power monitoring forever with
its first breakthrough innovation: an affordable, easy-to-use AC power
meter.
30 years later, Electro Industries/GaugeTech, the Leader In Web-
Accessed Power Monitoring, continues to revolutionize the industry
with the highest quality, cutting edge power monitoring and control
technology on the market today. An ISO 9001:2000 certified company,
EIG sets the industry standard for advanced power quality and
reporting, revenue metering and substation data acquisition and
control. EIG’s products can be found on site at virtually all of
today’s leading manufacturers, industrial giants and utilities.
*Electro Industries
1800 Shames Dr.
Westbury, NY 11590
USA
Tel: +1 (516) 334-0870
Fax: +1 (516) 338-4741
E-mail: sales@electroind.com
support@electroind.com
http://www.electroind.com
#
HICO America Sales and Technology, Inc. - Manufactures power
transformers at voltages up to 765 kV and ratings to 2,000 MVA/bank.
HICO America transformers are designed to the exacting specifications
of its customers. We supply both shell form and core form transformers
in single and three phase varieties at voltages up to 765 kV and
ratings to 2,000 MVA/bank.
HICO America's design processes and technology are superb. Powerful
computer analysis and design techniques are employed in all phases of
the design and verification process.
HICO America uses the finest manufacturing and quality control methods
and procedures to ensure that each unit is of the highest value.
*HICO America
Penn Center West
Building 2, Suite 406
Pittsburgh, PA 15276
USA
Tel: +1 (412) 787-1170
Fax: +1 (412) 787-2270
http://www.hicoamerica.com
#
IMS - Manufacturer of electronic kilowatt-hour meters for use in sub-
metering multiple unit facilities.
Located in the Tampa Bay area of Florida, IMS is family owned and
operated since 1989. Our manufacturing facility is operated under the
watchful eye of Charles Throckmorton our Engineer/CEO. Charles
regularly holds training sessions to ensure that all of our employees
are up to date with the latest technology and procedures.
Every meter shipped by IMS is tested, burned in (operated as in the
field), and tested a second time to guaranty accuracy.
You can buy Integrated Metering Systems, Inc. products with our
personal guaranty that every meter meets or exceeds Underwriters
Laboratories, Measurement Canada, and California Weights and Measures
standards for electronic kilowatt-hour sub-metering.
*Integrated Metering Systems, Inc.
6741 102 Avenue North
Suite 27
Pinellas Park, Florida 33782
USA
Tel: +1 (800) 488-3594
+1 (727) 546-3594
Fax: +1 (727) 541-4892
E-mail: support@imsmeters.com
Sales@imsmeters.com
http://www.kilowatthourmeter.com
#
Keystone Electrical Manufacturer Co. - Manufacture of protection and
control switchboards and switchgear as well as power delivery
accessory equipment including control buildings and mobile
substations.
Since 1964, Keystone Electrical Manufacturing Company has supplied
protection and control switchboards and switchgear to the world. Our
list of satisfied customers includes public utilities, general
contractors and large industrial users, both private and public
sector, on four continents. Our Des Moines manufacturing plant is
centrally located in North America and is able to meet your delivery
requirements by common carrier or with our own roll top air ride
tractor/trailer.
At Keystone Electrical Manufacturing, quality and your satisfaction is
job one. Our technical team has over 100 years of experience in the
design and production of power delivery equipment, and have on average
more than 10 years of individual service. The manufacturing team is
comprised of all regular Keystone employees. This level of experience
and commitment results in high quality products and superior customer
satisfaction.
Each contract is managed by an experienced project engineer. Through
design, production and delivery of your custom product, you will have
a single point of contact. This means you can monitor any phase of the
project with a single Tel: call. Your Project Engineer will be
assigned at contract award. He or she will review your specifications,
work with you on selecting components, and monitor manufacturing
progress through final delivery. Count on your Project Engineer to be
intimate with every detail of your project from initial design through
final delivery!
For a variety of substation, transmission, distribution, and
generation application, you can trust Keystone to deliver.
*Keystone Electrical Manufacturing
Company
2511 Bell Avenue
Des Moines, Iowa 50321
USA
Tel: +1 (515) 283-2567
Fax: +1 (515) 283-0418
http://www.keystoneemc.com
#
Mid-Central Electric - Manufacture of fixed load transformers for
7.2KV and 0.5 to 3.0 KVA.
Mid-Central can also supply:
• Primary bushing wells and secondary cable connections for dead front
applications
• Stainless steel tank and cover
• Arrester mounting provisions
• 5-pin secondary connections
• Dual hanger bracket configuration
Please consult sales office for voltages, sizes and bushing
arrangements available or to request spec information on specific
transformer configurations.
*Mid-Central Electric
880 North Market Street
Oregon, Wisconsin 53575
USA
Tel: +1 (608) 835 3513
Fax: +1 (608) 835 5246
http://www.midcentralelectric.com
#
Morpac Indistries, Inc. - Manufacturer for the electric utility
industry. High voltage electrical switches, line stringing equipment,
off road crawlers, stored energy operators and electric valve
actuators.
Morpac Industries Inc., founded by Lloyd Morgan in 1956, is a custom
manufacturer of specialized equipment for the electric utility and
electric valve actuator markets.
Actuators
A unique design of an electric valve actuator for navy vessels,
commercial ships, nuclear plants, water treatment facilities, and our
newest application -- a proportional fuel control system.
Heavy-Duty Off Road Crawlers
Designed to move up to 60 tons over rough terrain at 20 miles per
hour, they have been customized with rock drill, portable spars, and
line stringing equipment.
Line Stringing
Morpac specializes in transmission line pullers and tensioners used
for stringing high power electric transmission lines. Our cable
handling expertise is demonstrated by one of the world's longest spans
-- 19,000 ft. in British Columbia, Canada.
Switches
Morpac manufactures high-voltage disconnect switches ranging from
7.5kV to 800kV. The automation and remote operation of distribution
switches is made possible by Morpac's line of stored energy operators.
*Line Stringing & Switches
2725 East Ginter Road
Tucson, AZ 85706-5926
USA
Tel: +1 (520) 294-3452
Fax: +1 (520) 294-3332
E-mail: switches@morpac.com
http://www.morpac.com
#
Pacs Industries - Switchgear manufacturer of circuit breakers designed
for generators, substations, transformers and power plants.
PACS Industries, Inc., has manufactured metalclad switchgear since
1972. Circuit breaker elements, protective relays and other components
for inclusion into PACS Metalclad Switchgear may be manufactured by
companies such as ABB, G.E., Siemens, Square D/Merlin Gerin, A.E.G.,
GEC-Alsthom and others.
The heart of PACS metalclad switchgear assemblies are the circuit
breakers. Through 15kv, PACS purchases standard production models of
circuit breakers and circuit breaker "skeletons". The stationary
portion of the "skeleton" is jig-assembled and tested as is the
drawout circuit breaker element.
Above the 25Kv level (and where else necessary), PACS purchases Vacuum
or SF6 circuit breaker interrupter-assemblies, which we manufacture
into our own ANSI and I.E.C. tested, drawout trucks, cubicles and
switchgear.
The PACS manufacturing process consists in its simplest form, of
assembling "skeletons" into specified switchgear lineups,
manufacturing front and rear sheet-metal compartments, busing power
circuits, fabricating required weatherproof housings and completing
whatever else is required to fulfill PACS' contractual obligations.
The completed equipment then goes through a quality control and
specification conformance procedure, is ANSI or IEC production tested
and shipped.
PACS switchgear may be designed for generator switchgear, feeder
units, bus-tie units, or for whatever standard or special applications
may be required. Single and double bus bar systems are standard. The
latest microprocessor relays are available.
*PACS Industries
61 Steamboat Road
Great Neck, NY 11022
USA
Tel: +1 (516) 829-9060
Fax: +1 (516) 829-9557
E-mail: sales@pacsind.com
http://www.pacsind.com
#
Petroflex, NA, Inc. - Manufactures high density polyethylene conduit,
secondary electrical pedestals, composite crossarms, insulators, and
accessories to the telecommunications, electrical utility, catv and
data voice industries.
*Petroflex North America, Ltd.
1305 North I-35
Gainesville, TX 76240
USA
Tel: +1 (800) 433-5711
+1 (940) 668-7283
Fax: +1 (940) 668-6097
E-mail: pnasales@petroflexna.com
http://www.petroflexna.com
#
Plastic Dip Moldings, Inc. - Manufacture of wildlife outage protectors
for substations and power lines.
*Plastic Dip Moldings, Inc.
37 Appletree Lane, P.O. Box 450
Plumsteadville, PA 18949
USA
Tel: +1 (888) 414-2398
E-mail: sales@insulboot.com
http://www.wildlifeoutageprotectors.com
#
Point Eight Power, Inc. - Manufacturer of custom switchgear for the
offshore oil and gas market, marine, gasoline service stations,
petrochemical and military application.
Point Eight Power, Inc. has been manufacturing custom switchgear over
forty-five years for the offshore oil and gas market, marine, gasoline
service stations, petrochemical, heavy industry, commercial,
government and military applications. We are an Underwriters
Laboratories Listed control system manufacturer UL891 (Dead-Front
Switchboards), UL1558 (Metal-Enclosed Low-Voltage Power Circuit
Breaker Switchgear), ANSI/IEEE Metal-Clad and Station-Type Cubicle
Switchgear, UL845 (Motor Control Centers), UL347 (High Voltage
Industrial Control Equipment), UL508 (Industrial Control Panels),
UL508A (Industrial Control Equipment Supplement SA - Industrial
Control Equipment for Marine Use), UL67 (Panelboards Supplement SA -
Panelboards for Marine Use), UL Listed Commercial Buildings, and meet
all applicable United States and European regulatory standards.
Additionally, we hold KEMA Certificates for IEC 298 and ANSI C37 and
have achieved MIL 901D accreditation.
A talented and experienced engineering staff has designed and
coordinated virtually every type of switchgear, PLC controls, relay
logic, pneumatic and hydraulic control systems from 120 VAC to 34 kV.
Point Eight's engineers use the most up-to-date control technology in
our designs, with in-house computer programs that provide estimating,
drafting and manufacturing a common data base that gives us the
flexibility to do standard or custom panels at an economical cost.
The fabrication department has manufactured a wide range of enclosures
from outdoor walk-in to our standard product line. Craftsmen are
thoroughly experienced with carbon, stainless steel, aluminum,
galvanized and plate steel and are certified welders by third party
testing.
With our state of the art Trumpf TCL260 automated punch press along
with supporting computer controlled press break and sheers, we rank
among the leaders in sheet metal design and fabrication abilities.
Our ability to go from engineering to fabrication by computer
interface has allowed us to move to the forefront of productivity,
innovation and response to customer requirements.
All stages of construction follow a strict ISO-9001 quality control
program from the quotation to completed product. Point Eight is
committed to providing a quality product and customer satisfaction
from start to finish. Our reputation for quality is well known and is
derived from good engineering, material selection, production planing
and genuine pride in manufacturing.
Our capabilities in engineering, drafting, sheetmetal, material
selection, wiring, tubing, testing, field service and replacement
parts offers the customer a complete manufacturing and service
company. Our facility in Belle Chasse, Louisiana includes a 100,000
square foot manufacturing area, a 30,000 square foot office area, and
open and enclosed staging areas totaling over 14 acres and 600 feet of
waterfront with direct access to the Mississippi River at our 1503
Engineers Rd. location.
*Point Eight Power Inc. Electrical
Systems
1510 Engineers Rd.
Belle Chasse LA. 70037
USA
Tel: +1 (800) 284 1522
+1 (504) 394 6100
Fax: +1 (504) 394 6686
E-mail: info@point8.com
http://www.point8.com
#
Protect Controls, Inc. - A custom manufacturer of turnkey power
control buildings.
We want to welcome you to PCI by providing some background about the
Company's technologies and the process of developing products so that
you can understand how your work contributes to our efforts.
Don Davis founded Protect Controls, Inc. in November 1973. It is
located at 303 Little York Road in Houston, Texas. It is located on
approximately 6 acres with 3 buildings with over 225,000 square feet
of production area.
Our purpose is to manufacture custom Power Control Buildings for our
customers. Working with customers is vital to our development. We
intend to develop all of our products through corporate alliances, and
hence we are continuously building relationships, negotiating
partnerships and licensing technologies with potential corporate
partners with both large and small companies. Our mission is to be the
number one provider of the highest quality Power Control Buildings.
*Protect Controls, Inc.
303 Little York Rd
Houston, TX 77076
USA
Tel: +1 (713) 691-5183
Fax: +1 (713) 691-0159
E-mail: gblack@protectcontrols.com
http://www.protectcontrols.com
#
Quick Industries, LLC. - Manufacturer of simple mechanical devices
that directly attach to pole-mounted equipment and make switching
operations a simple task.
Quick Industries, LLC was founded in fall of 1999 as a Georgia based
company created with the vision of introducing new and innovative
products to the electric utility industry. Quick is an LLC Partnership
bringing together individuals with decades of experience in
manufacturing, design and electric utility operations.
Corporate offices are located in Thomasville, GA with marketing and
sales offices located in Atlanta, GA.
With a full compliment of products for the electric utility industry
under development, Quick is currently taking orders for it’s premier
products: QuickTrigger, QuickHook, QuickClip, QuickTip, QuickBeam,
QuickSleeve and QuickLever and future products. These products are
designed to allow utility linemen to perform their tasks on an
electric distribution system faster and safer. Additionally, our
products allow utilities to restore power faster during times of
natural disasters such as floods, hurricanes, tornadoes, ice storms
and even thunderstorms.
For decades electric utilities have operated their pole mounted
equipment with the traditional hook stick method. For utility system
crews, this has been a challenging and sometimes impossible task to
accomplish. With some equipment mounted up to forty-five feet in the
air it becomes nearly impossible to hook a one-inch ring with a
flexible fiberglass extension rod.
Because of this, work crews often use their bucket trucks to get
closer to the switching devices. This requires time increasing outage
duration and multiplying the risk of injury to personnel. Most
governing state utility commissions include outage duration in a
utility's measurement of performance. Quick products can improve this
measurement by significantly reducing customer outage duration.
Quick products fill the industry need of easier methods to operate
pole-mounted switching devices such as: oil circuit reclosers, fused
cut-outs, sectionalizers, CSP transformers, in line disconnect
switches and other hook stick type switches on electric distribution
systems. Our products are simple mechanical devices that directly
attach to pole mounted equipment and make switching operations a
simple task.
*Quick Industries, LLC.
PO Box 153
Thomasville, GA 31799-0153
USA
Tel: +1 (229) 551 9164
Fax: +1 (229) 226 4150
E-mail: james@quickindustries.com
http://www.quickindustries.com
#
Fluke Corporation - Manufacture of power monitoring and data
management equipment as well as predictive maintenance software.
*Fluke Corporation
6920 Seaway Blvd
PO Box 9090
Everett, WA 98203
USA
Tel: +1 (425) 347-6100
+1 (800) 44-FLUKE
Fax: +1 (425) 446-5116
http://www.reliablemeters.com
#
Remote Monitoring Systems Inc - Manufacturers underground cable fault
technologies, and offers a range of products and services to improve
system reliability.
Remote Monitoring Systems, Inc. develops, manufactures and markets
cost effective cable fault locating solutions for the electric utility
industry. The company is a US manufacturer that both develops and
manufactures its products in the Philadelphia Metropolitan area.
Remote Monitoring Systems, Inc. uses the latest technology available
to provide simple, cost effective solutions to real life problems,
without forgetting the end-user.
*RMS Corporation
270 Valley Road
Media, PA 19063
USA
Tel: +1 (484) 840-0268
Fax: +1 (484) 840-0269
E-mail: info@cable-fault.com
sales@cable-fault.com
support@cable-fault.com
http://cable-fault.com
#
Rse-Sierra, - Manufacturer of quality metal clad and metal enclosed
switchgear, low voltage switchboards, commercial panelboards and motor
control centers.
*Rse-Sierra
4411 East La Palma Ave
Anaheim, Ca 92807
USA
Tel: +1 (714) 577 9988
Fax: +1 (714) 927 2723
E-mail: info@rse-sierra.com
http://www.rse-sierra.com
#
Systems Engineering and Sales Co, Inc. - Manufactures stationary and
mobile transformer oil purification equipment.
Over 30 years of engineering, manufacturing, and customer service has
made SESCO industry's preferred source for industrial lubrication,
fluid conditioning, fluid purification, and vacuum process equipment.
*Systems Engineering & Sales Co.,
Inc.
3805 East Pontiac St.
Fort Wayne, IN 46803
USA
Tel: +1 (260) 422-1671
Fax: +1 (260) 424-0607
E-mail: info@mail.sesco-inc.com
http://www.sesco-inc.com
#
Tucson Transformer and Apparatus - Manufacture of power distribution
equipment and high voltage equipment for use in electrical power
distribution systems.
Tucson Transformer & Apparatus was originally founded in 1986 under
the name of Substation Apparatus & Supply Company (SASCO). Our company
has many years of experience in construction of high voltage power
lines and electrical power substations, We built a thriving business
that dealt with all high voltage equipment relating to electrical
power systems and electrical power distribution. In 1995, Harry Lang
moved the business from Salt Lake City to Tucson, Arizona and
subsequently renamed the business to Tucson Transformer & Apparatus.
Conveniently located close to the Tucson International Airport and
very close to interstate highways and rail, Tucson Transformer &
Apparatus has three buildings with over 20,000 square feet and
enormous space for outside storage in Southern Arizona's well-known
mild and dry climate. Our electrical technicians have broad experience
in repairing and refurbishing high voltage and power distribution
transformers, circuit breakers, switchgear and a wide variety of
related electrical equipment.
Sales are handled by John Stamy as well as Carlos Batista. John Stamy
brings over 15 years of sales experience in the power transformer
industry and is very well respected across the country for his
integrity and expertise in power transformer sales. Carlos Batista
travels throughout the Southwest, calling on industrial and electric
utility customers and locating surplus electrical equipment for re-
sale.
Whether you are looking to buy power distribution equipment or looking
for fair prices for your surplus electrical equipment, give Tucson
Transformer a call!
*Tucson Transformer & Apparatus
8420 South Nogales Hwy.
Tucson, AZ 85706
USA
Tel: +1 (520) 625-0069
Fax: +1 (520) 625-0056
E-mail: sales@tucsontransformer.com
http://www.tucsontransformer.com
#
Victor Insulators, Inc. - Manufacturer of high voltage insulators with
information on the company, events, location, products and contacts.
Victor Insulators, Inc. was founded in 1893 by Fred M. Locke.
Fred Locke was one of the great early contributors to the successful
establishment and growth of the electric power industry in North
America. In 1893 he developed and patented a process for manufacturing
wet process porcelain for use in insulators for power lines. His
accomplishment was in no small way a key contribution to the eventual
growth of the electric power industry. Prior to Fred's
accomplishments, insulators were at best unreliable for the demands of
this growing industry.
Although the company that Fred Locke established in Victor NY has
changed names over the years, Victor Insulators, Inc. is the direct
successor to the operation that he began over 100 years ago.
Today, Victor is a privately held (employee owned) company dedicated
to the same ideals that have been successful since 1893. Our
commitment to quality, service and competitive pricing continues to
make us the preferred supplier of insulators.
Located in Victor, NY (near Rochester)
Victor's plant today consists
of over 320,000 square feet of manufacturing space and employs
approximately 250 people.
Victor manufactures the widest product line of any North American
insulator manufacturer. The manufacturing process produces insulators
ranging in weight from a few ounces to hundreds of pounds and
application voltages from hundreds of volts to hundreds of thousands
of volts.Insulators are manufactured from standard strength silica
porcelain, high strength alumina porcelain, EPDM rubber and silicone
rubber.
All porcelain products are manufactured using wet process porcelain to
ensure reliable, trouble free operation for the life of the
installation of the product. Insulators are available in two porcelain
classes - standard strength silica porcelain for normal applications
and high strength alumina porcelain for severe duty.
Ceramic processing is controlled by a highly trained staff of
professional engineers dedicated to ensuring that product quality
remains our number one priority. Victor is continuously updating
manufacturing methods and equipment and participates in research
programs with major universities to ensure that we remain at the
forefront of insulator technology.
Polymeric insulators are manufactured from EPDM rubber for normal duty
application and silicone rubber for contaminated environments.
Polymeric products are injection molded using the latest in cold
runner molding technology.
Insulators are manufactured from standard strength silica porcelain,
high alumina EPDM rubber and silicone rubber. The mechanical and
electrical test laboratory and the ceramic laboratory are used to
verify product and process conformance. These labs have the capability
to perform all necessary tests to ensure product quality or to assist
customers in developing products for new applications. Victor makes
use of our laboratories available to customers at a nominal fee to
assist in verification, selection and analysis of insulators.
*Victor Insulators, Inc
280 Maple Avenue
Victor, NY 14564
USA
Tel: +1 (585) 924-2127
Fax: +1 (585) 924-7906
E-mail: sales@victorinsulators.com
http://victorinsulators.com
#
ZIV - Manufacturing of digital protection, control, metering, and
communications, products for substations, power lines, and electrical
power machines.
Welcome to a company dedicated to the design and manufacture of high-
quality, innovative digital protection, control, metering, and
communications products for substations, power lines, and electrical
power machines.
Capacitor Bank Protection & Control
Discover our capacitor bank protection unit. Designed to protect
grounded and ungrounded banks. Efficient and economic.
Bus Differential Protection
Distributed architecture translates into substantial savings in
reduced wiring and installation costs. Highly adapatable to almost
every bus configuration.
Ideal choice when applying on existing buses where various CT ratios,
classes and vintages are used.
*ZIV USA, Inc.
2340 River Road, Suite 210
Des Plaines, IL 60018
USA
Tel: +1 (847) 299-6580
Fax: +1 (847) 299-6581
E-mail: sales@zivusa.com
http://www.zivusa.com
Internet guide
Art
| Business | Computer | Debt | Domain names | Finance | Health | Games | Home | Insurance | Jobs | Mortgage | News | Recreation | Science | Shopping
Sports | Travel | Webhosting | Webmasters
