Adhesives
Adhesive Packaging Specialties, Inc. -
Manufacturer and custom
filling of adhesives pre-packaged in dual cartridges, syringes, pre-
mixed and frozen and other containers.
Adhesive Packaging Specialties (APS) Incorporated began custom
packaging single component and multi-component resin materials in
1977.
For more than two decades, APS has
remained dedicated to the highest
quality and customer satisfaction in packaging.
APS customers include both formulators and end users in a wide
variety of industries, such as aerospace, automotive, computers,
construction, electronics and telecommunications.
Applications using APS products vary from minor repair kits to
sophisticated manufacturing processes such as conductive materials
used on semiconductors.
APS products are sold throughout the
world.
*Adhesive Packaging Specialties, Inc.
103 Foster Street
P.O. Box 31
Peabody, MA 01960
USA
Tel: +1 (800) 222-1117
+1 (978) 531-3300
Fax: +1 (978) 532-8901
E-mail: customerservice@adhesivepackaging.com
sales@adhesivepackaging.com
http://www.adhesivepackaging.com
#
Adhesives Research Inc. - Manufacturer of pressure-sensitive
adhesive tape products for medical, industrial, splicing,
pharmaceutical and electronics applications.
*Adhesives Research, Inc.
400 Seaks Run Road
Glen Rock, PA 17327
USA
Tel: +1 (717) 235-7979
Fax: +1 (717) 235-8320
http://www.adhesivesresearch.com
#
Applicator Systems Inc. - Manufactures high quality hot melt hoses,
electrically heated hoses and custom hoses that are compatible with
hot melt systems on the market. Applicator Systems also specialize
in custom hoses designed and built to meet specific requirements.
Hot Glue Guns, heated blankets, heat transfer hoses, heat tapes, and
flexible electric heaters are just some of the other products we
manufacture.
Applicator Systems is establishing itself as a prime source for high
quality heated hoses. We manufacture hoses that are compatible with
most hot melt systems on the market today. We also specialize in
custom hoses, designed and built to meet specific requirements.
These hoses are electrically heated for operation to 500?F (260?C).
They are lightweight and flexible and can be operated in continuous
movement conditions. They are fully insulated to minimize heat loss.
Our hoses are available in diameters from 3/16" up and in any
length. When required, hoses can be designed to withstand extremely
high pressures. We supply each hose complete and ready to install
with a temperature controller or an existing control unit.
Applicator Systems maintains an extensive inventory of the most
popular heated hoses used with the most common hot melt applicators.
If you need a hose that's not on our price list, please contact the
factory for pricing and delivery information.
At times we may need to see an old hose to verify its construction,
so that we can be sure to provide all the electrical connections,
temperature sensors, and fittings that are compatible with your hot
melt supply unit.
We will provide a new part number for your records and correlate
that number back to the OEM's part number and description. This will
assure proper installation and use, as well as convenient re-
ordering.
*Applicator Systems Inc.
419 Shasta Ave.
Sand City, California 93955
USA
Tel: +1 (831) 394-3613
Fax: +1 (831) 394-7784
E-mail: info@applicatorsystems.com
http://www.applicatorsystems.com
#
Bondine Electronic Adhesives, Inc. - Manufacturer of epoxy, silicone
and polyurethane adhesives for electronics, medical equipment and
disk drives.
Bondline Electronic Adhesives is U.S. based manufacturer of premixed
and film adhesives. We produce custom formulations as well as
repackage commercially available materials. With a broad client base
covering numerous industries, Bondline Electronic Adhesives strives
to meet the needs of current and future customers.
Bondline Electronic Adhesives was founded in 1989. The company
headquarters and main laboratory are located in San Jose, CA.
Bondline Electronic Adhesives is committed to the highest quality
in adhesive products through dedication to product reliability,
conformance to specifications and timely delivery. In the fast pace
of changing technology we are committed to distinguish ourselves as
a reliable and responsive adhesive company serving customers
domestically as well as internationally.
*Bondline Electronic Adhesives, Inc
2450 Kruse Drive
San Jose, CA 95131
USA
Tel: +1 (408) 434-0400
Fax: +1 (408) 434-0585
E-mail: sales@bondline.net
http://bondline.net
#
Capital Services' Epoxies and Expansion Joint Systems - Manufacturer
of expansion joints, (Evazote and MetaZeal) for parking garages,
bridges and water treatment plants. Capital Services also offers a
full line of epoxy injection equipment and elastomeric concretes.
MetaZeal® and EVAZOTE provide a waterproof expansion joint over a
wide movement range. This is particularly valuable where maximum
movement and extreme distortion capabilities are required. While
these materials have a working range of 60% compression and 30%
tension, they may be subjected to higher movement parameters for
limited periods of time.
Our line of elastomeric concretes may be
used with or without armor
in high stress areas such as bridges, parking decks and other
commercial structures where a non-shrink, energy absorbing,
flexible, waterproof end-dam is required. With outstanding wear
resistance, it has been designed to combat the toughest of
conditions
Our Easy-1 machine will surprise you with
its ease of operation.
This user-friendly machine does not require a compressor and many of
the replacement parts may be obtained through local suppliers. Best
of all, this injection machine will do it all at a fraction of the
cost of those other for more expensive machines.
Our Easy-1 CJ pumps both epoxies and
polyureas, making this the
machine for contractors who require convenience as well as
efficiency. The Easy-1 CJ can pump up to 3000 feet of joint
material per hour (based on 1/8" x 1/2" joint opening). It will
pump material from bulk at your desired ratio, at a steady flow,
mixes and dispenses the material easily and conveniently.
*Capital Services' Epoxies and Expansion
Joint Systems
112 Morris Rd.
Schenectady, NY 12304
USA
Tel: +1 (800) 356-6007
+1 (518) 344-7777
Fax: +1 (518) 346-1110
E-mail: capserv@aol.com
http://members.aol.com/capserv/index.htm
#
ChemCo Systems - Manufacturer of structural epoxy adhesives and
coatings for repair and protection of concrete. Includes crack
injection resins and metering pumps, repair grouts and mortars,
coatings for corrosive chemicals and difficult environments
including underwater.
At ChemCo Systems, we believe that expertise makes all the
difference to our customers. Our staff engineers and chemists
average over 25 years of industry experience, and many participated
in the original development of structural adhesives for concrete
repair and restoration. Their original research and testing into the
behavior of adhesives under sustained stress led to the adoption of
minimum test standards by ASTM. Today we remain active in the
standards and technical committees of ACI, ICRI, ASTM, ACS and CSI.
Founded in 1994 by the same experienced people who developed the
SCB® system of structural crack repair at Adhesive Engineering,
ChemCo Systems manufactures a diverse selection of polymer systems
for use in construction applications. Our products are designed to
install, protect or repair architectural and structural concrete,
steel, wood as well as both carbon and glass fiber composite
systems. Over 100 ChemCo products are available for: structural
crack repair, anchor bolts, coatings and sealants, machine bases,
old-to-new pours, seismic upgrades, plate bonding reinforcement,
spall repair, underwater (marine) and extreme environments. In
addition, ChemCo offers custom formulation, compounding, toll
manufacturing and product testing services using ASTM and ACI
standards.
ChemCo encourages architects, engineers, specification writers and
contractors to forward questions and application problems to our
manufacturing, testing and formulation experts. ChemCo product
development, product testing and manufacturing is located under the
same roof so information is shared quickly between departments.
ChemCo owns and operates its own physical, chemical and
environmental testing equipment and can simulate most extreme
product applications.
Our staff includes equipment designers who fabricate, test and build
specialized mixer heads and high pressure positive displacement pump
systems to be used by specially trained licensed applicators.
Automated models featuring electronic control systems are available
for two component product materials including: low viscosity
injection resins, pastes and high volume joint sealants and grouts
for both epoxies and polyureas.
*ChemCo Systems
2800 Bay Road
Redwood City, CA 94063
USA
Tel: +1 (650) 261 3790
+1 (800) 757 6773
Fax: +1 (650) 261 3799
E-mail: email@chemcosystems.com
http://www.chemcosystems.com
#
Chemence US - Manufacturer of adhesives and specialty chemicals
including cyanoacrylate, photopolymer, vacuum impregnation sealant,
anaerobics, threadlockers.
*Chemence US
185 Bluegrass Valley Parkway
Alpharetta, CA 30005
USA
Tel: +1 (770) 664 6624
Fax: +1 (770) 664 6620
http://www.chemence-us.com
#
Clifton Adhesive, Inc. - Manufacturer of solvent or water based
industrial adhesives and coatings. Inflatable fabrication, textile
and film converting, fabric assembly, special applications, toll and
custom mixing.
Clifton Adhesive, Inc. is a manufacturer of solvent or water base
specialty, industrial adhesives and coatings. Founded in 1945, the
family owned company is based in Wayne, New Jersey where all aspects
of the business are located. The various departments work closely
together to achieve maximum output and efficiency. For our
customers, an answer is only a Tel: call away.
Clifton Adhesive's product line consists of more than 400 active
formulas used for various applications. When a customer has specific
requirements, our chemists will customize an existing product or
develop a new one. The Sales and Technical Departments work closely
with one another to facilitate the progress of all new projects,
making sure the needs of the customer are addressed. Samples are
then provided for evaluation.
The current output is in excess of five thousand gallons per day
from churns varying in capacity from 50-1000 gallons. Clifton has
two mills enabling rubber based products to have milled portions of
the formula. Milling greatly enhances the chemists' ability to
customize the end properties of a product. Through an efficient
scheduling process, most orders are shipped within two weeks from
the order date.
Clifton Adhesive, Inc. is always aware of the environment and
emission standards while formulating. When possible, products have
been reformulated using exempt solvents or those with lower VOCs.
Water base products are considered whenever feasible. Compliance
with State and Federal regulations is a priority. The sales force
works with the customer to encourage awareness and understanding of
these regulations. The end user's equipment and capabilities are
always considered while conforming to the regulations and standards.
Clifton Adhesive, Inc. is large enough to manufacture in volume yet
small enough to provide "old fashioned" service.
*Clifton Adhesive, Inc.
48 Burgess Place
Wayne, New Jersey 07470
USA
Tel: +1 (973) 694-0845
Fax: +1 (973) 694-5678
E-mail: sales@cliftonadhesive.com
http://www.cliftonadhesive.com
#
Craig Adhesvies and Coatings Company - Manufacturers of adhesives,
UV coatings, non-skid UV coatings, instant lottery ticket coatings,
and specialty coatings.
For more than 30 years, Craig Adhesives and Coatings has been a
market leader in the formulation and manufacture of chemical
technologies for the printing, packaging, and instant lottery ticket
industries. We currently enjoy status as a globally respected
producer of quality coatings, adhesives, and inks used throughout
the printing industry and our products can be found on virtually all
types of printed advertising and promotional materials found in
everyday life.
Craig operates two manufacturing facilities in Newark, New Jersey
and has distribution centers and sales agents around the globe
specializing in aqueous, Ultra Violet (UV) and Electron Beam (EB)
technology for labels, lottery, packaging, business forms, and
direct mail.
*Craig Adhesives And Coatings
80 Wheeler Point Road
Newark, New Jersey 07105
USA
Tel: +1 (973) 344-1483
Fax: +1 (973) 344-4767
E-mail: delliott@craigadhesives.com
http://www.craigadhesives.com
#
Cyberbond Adhesives - Manufacturer of high quality engineering
adhesives. Specializing in cyanoacrylates, anaerobics, UV-curable
and polyurethane adhesives.
Cyberbond L.L.C. manufactures and markets a wide range of specialty
adhesives for industrial product assembly applications. As a QS9000
certified company we are committed to producing the highest quality
and most reliable adhesives possible.
Cyberbond’s major product offerings are listed above. They contain
lists of our standard products within each category and all of the
technical and safety data can be accessed, downloaded, and printed
easily.
*Cyberbond Adhesives
401 N. Raddant Road
Batavia, IL 60510
USA
Tel: +1 (630) 761 8900
Fax: +1 (630) 761 8989
http://www.cyberbond1.com
#
Diversified Chemical, Inc. - Manufactures and markets specialty
chemical products such as adhesives, coats and glues for the
aerospace, automobile and food processing industries.
As we look to the future, we borrow a phrase from Chaucer, who said,
"The past is prologue". At Diversified Chemical Technologies, Inc.,
we are always challenging ourselves to grow. In the past three
years, we have built two new manufacturing facilities in Detroit and
a third in South Korea. Another plant is in the planning phase as
part of further expansion plans in the USA.
Our alliance partners, Xerox and Procter & Gamble are global
companies with which we anticipate future growth. We will continue
to extend our activities with smaller, technically driven companies
in Europe, Asia and the United States, for the purposes of both
licensing and joint ventures.
We see ourselves as a best in class NICHE company, that is global in
its operations and its core technologies of specialty chemical
products for the automotive, steel, electronics, transportation and
consumer packaging industries.
As we walk through our laboratory and offices, we are humbled and
delighted that we have been able to attract such top notch people
from Asia, Europe, the Middle East, India, and Africa. Because they
have made the United States their home, Diversified Chemical
Technologies, Inc. will be able to make its home The World.
*Diversified Chemical, Inc.
USA
Tel: +1 (800) 328-5382
610
Fax: +1 (800) 805-9350
E-mail: info@dchem.com
http://www.diversifiedchemicalinc.com
#
Dymax - Produces UV curing aerobic and surface activated solvent-
free adhesives and UV/visible curing equipment. End uses include
metal, glass,plastic and optical product bonding.
World Class Adhesives and
UV Curing Lamps for Assembly
Innovative Solutions
that Don't Stop With the Adhesive
Looking for an adhesive or sealant to improve quality, efficiency,
and increase the through-put of your assembly process? We'll
provide
it for you or make sure you're acquainted with the products and
companies that can.
Located in Torrington, CT, DYMAX is an ISO 9001 certified company
proud to offer its products worldwide through a global network of
distributor partners and Frankfurt based DYMAX Europe.
*DYMAX Corporation
51 Greenwoods Road
Torrington, CT 06790
USA
Tel: +1 (860) 482-1010
Fax: +1 (860) 496-0608
E-mail: info@dymax.com
http://www.dymax.com/index.asp
#
Dyna-Tech Adhesives, Inc. - Manufacturer of environmentally
friendly, water-based pressure sensitive adhesives.
Dyna-Tech Adhesives, Incorporated was founded in 1981, by Richard C.
Oldack, to produce and sell environmentally friendly rubber-resin
water-based pressure sensitive adhesives (PSA's) for the tape, label
and graphic arts industries.
Dyna-Tech, a subsidiary of Rex-Hide Industries, Inc, pioneered and
developed a new technology in rubber-resin emulsion PSA's to provide
new opportunities in adhesive processing and performance for North
American Adhesive coaters. The advantages of these adhesive systems
are their aggresive adhesion to a broad range of subtrates,
excellent converting properites and the ability to replace existing
solvent-based rubber-resin adhesive systems.
During the past 18 years, through product innovation, technical
support and unmatched customer service, Dyna-Tech has become the
leading supplier of rubber-resin water-based pressure sensitive
adhesives in the world. As Dyna-Tech has grown, we have expanded our
product line from primarily rubber-resin emulsion PSA's into new
adhesive technologies for a wider variety of end-use applicaitons
and improved performance.
*Dyna-Tech Adhesives, Inc.
USA
Tel: +1 (800) 847 7773
Fax: +1 (304) 265 5202
http://www.dyna-techadhesives.com
#
Franklin International - Manuacturer of solvent borne, water borne
and polyurethane adhesives for construction applications.
Founded in 1935 as the Franklin Glue Company, we began with a
solution. To address a major concern in the furniture manufacturing
industry, we developed the first ready-to-use liquid hide glue. It
could be applied at room temperature instead of 140°F for
traditional hide glue and it allowed twenty minutes of assembly time
instead of two. Today, our liquid hide glue is still widely used for
interior woodworking, musical instruments, and antique restoration.
As the years passed, Franklin Glue Company became Franklin
International to more accurately reflect the global contributions of
our business.
Liquid hide glue was only the first of a long line of solutions to
real world problems. Titebond(r) aliphatic resin and its water-
resistant cousin Titebond II for woodworking. Two-part
polyurethane's for filters. A high-performance binder for fiberglass
mats used to make roofing shingles. Made-to-order pressure-sensitive
adhesives for package labels, postage stamps, and envelopes. FDA
approved adhesives for microwave popcorn bags. Binders that
eliminate VOCs from the manufacturer of preformed fiberglass shapes.
Glues that cure in seconds with radio-frequency energy. Adhesives
that hold sound deadening panels in cars. The list goes on, and
includes structural adhesives, sealants, caulks, coatings and films.
At Franklin International, we do more than sell adhesives. We solve
technical problems.
Our solutions improve quality, enhance safety, accelerate
manufacturing cycles, cut delivery times and, on occasion, provide
the basis for strategic marketing advantages and new product
categories. Just as important, we do it quickly and cost-
effectively. Because we believe as strongly in tomorrow as in today,
we devote an unusually high percentage of our resources to research
and development. That's where defined solutions become reality and
where advances in adhesive technology are converted into practical
applications.
A vast array of Franklin's products is now distributed globally and
touches the lives of millions. But we're still a family-owned, U.S.
- based company operating under our original philosophy - creativity
and innovation with an intense focus on personalized service,
superior product quality and total customer value.
*Franklin International
2020 Bruck Street
Columbus, Ohio 43207
USA
Tel: +1 (800) 877-4583
+1 (614) 443-0241
Fax: +1 (614) 445-1813
E-mail: iascs@franklininternational.com
http://www.franklinadhesives.com
#
Henkel Loctite Corporation - Worldwide manufacturer of acrylic,
cyanoacrylate, epoxy, urethane and hot melt adhesives for industrial
applications.
*Henkel Loctite Corp
1001 Trout Brook Crossing
Rocky Hill, CT 06067
USA
Tel: +1 (860) 571 5100
http://www.loctite.com
#
ITW Plexus - Manufacturer of acrylic adhesives for structural
bonding applications including thermoplastics, metals and
composites.
ITW Plexus® is a business unit of Illinois Tool Works, a Fortune 200
company, and a worldwide giant in fastening, joining, sealing, and
coating technologies. The Plexus business unit makes and sells the
patented new Plexus methacrylate adhesives for structural bonding of
nearly all thermoplastics, metals, and composite materials. A key
benefit of these adhesives is their ability to provide extremely
durable bonds with little or no surface preparation. Plexus
adhesives have a proven record of outstanding performance in the
most demanding applications in the transportation, marine, and
engineering construction industries.
*ITW Plexus
30 Endicott Street
Danvers, MA 01923
USA
Tel: +1 (978) 777-1100
Fax: +1 (978) 774-0516
E-mail: shennessey@itwplexus.com
http://www.itwplexus.com
#
Kruse Adhesive Tape, Inc. - Manufacturer and distributor of pressure
sensitive tapes, adhesives, glues, labels, dispensing equipment,
packaging supplies
Kruse Adhesive Tape converts and distributes a wide variety of high
quality pressure sensitive adhesive tapes, specialty tape, labels,
tags and industrial supplies. The unique combinations of our
adhesives, dispensing equipment, and technical services allow us to
provide our customers with innovative solutions to their design,
production, packaging and purchasing problems.
Whenever materials need to be sealed, held, reinforced, identified,
masked, protected or spliced, you'll find a solution at this
website. At Kruse Adhesive Tape we have..."Products and ideas that
stick!"
*Kruse Adhesive Tape
16582 Burke Lane
Huntington Beach, CA 92647
USA
Tel: +1 (714) 596-0707
Fax: +1 (714) 596-4887
E-mail: dkruse@krusetape.com
http://www.krusetape.com
#
Loxeal Engineering Adhesive - Loxeal manufacturer of adhesive,
sealants, anaerobics, cyanoacrylate, UV curing, two-components,
acrylic, dosing system, silicons, gasketing, bonding, superglue.
Loxeal LLC is an US company producing a wide range of technically
advanced adhesives and sealants addressed to industrial
applications.
Our industrial anaerobic, cyanoacrylate, epoxies, acrylic and UV
curing adhesives as well as all the other complementary products
have been proven to perform to the highest standards and have been
trusted by many leading manufacturers; furthermore, some of our
products received several Certifications and approvals for uses with
Gas and Potable Water under NSF standard and other.
Established in 2002 in the outskirts of Philadelphia, Loxeal LLC is
well located and able to grant quality products and service to those
industrial users and commercials where reliability and service are
of principal importance.
*Loxeal Engineering Adhesive
USA
Tel: +1 (800) 714-0170
Fax: +1 (610) 644-9426
http://www.loxeal.com
#
MBK Enterprises, Inc. - Manufacturer, distributor and rep. of
adhesives, gaskets, dies, plastic laminations.
With today's industries using lighter materials and less costly
manufacturing methods, more and more companies are using converted
tapes to meet their toughest manufacturing challenges.
Converted tapes are accomplishing jobs that would have been
impossible five years ago, such as bonding steel strips to airplane
wings, or fastening metal side panels on buses and ambulances.
Converted tapes are now used in manufacturing to accomplish a
variety of traditional tasks like monitoring circuit boards, sealing
and glazing windows, protecting surfaces, insulating refrigerator
doors, sound dampening computer printers and hundreds more.
Converted tapes can make almost any job imaginable easier and more
economical. MBK's business revolves around finding and manufacturing
the highest quality tape products; all the while offering our
customers a cost-effective solution to their manufacturing
challenges.
*MBK Enterprises, Inc.
10138 Canoga Ave.
Chatsworth, CA 91311
USA
Tel: +1 (818) 998-1477
+1 (800) 479-9707
Fax: +1 (818) 998-6059
E-mail: cdoherty@mbk1.com
http://www.mbk1.com
#
Micor Company, Inc. - Manufacturer of coatings, sealers, flooring
systems, waterproofing and membranes.
Micor Company, Inc., since 1969, is a leader in manufacturing the
highest quality performance coatings and epoxy grouts.
With manufacturing and research development facilities located in
Milwaukee, Wisconsin, Micor offers an extensive line of quality-
tested polymer formulations for correctional and institutional
facilities, food processing, chemical, pulp and paper and decorative
flooring applications.
Our experienced technical department provides assistance in
evaluating the right product for your applications. We excel in
providing customer satisfaction. We look forward to hearing from
you.
*Micor Company, Inc.
3232 N. 31st Street
Milwaukee, WI 53216
USA
Tel: +1 (414) 873 2071
Fax: +1 (414) 873 3904
E-mail: micorox@execpc.com
http://www.micorco.com
#
Nordson Corp. - Manufacturer and distributor of adhesive dispensing
systems, adhesive applicators, guns and hoses, and bookbinding.
Nordson Corporation is the world's leading producer of precision
dispensing equipment. Nordson systems apply adhesives, sealants and
coatings to a broad range of consumer and industrial products during
manufacturing operations, helping customers meet quality,
productivity and environmental targets.
Nordson products are used around the world in the appliance,
automotive, bookbinding, construction, container, converting,
electronics, food and beverage, furniture, medical, metal finishing,
nonwovens, packaging, pharmaceutical and other diverse industries.
The company's growth is based on a customer-driven strategy that is
global in scope. Headquartered in Westlake, Ohio, Nordson markets
its products through a network of direct operations in 30 countries
throughout North America, Europe, Japan, Asia, Latin America and
Australia. Consistent with this strategy, more than 50 percent of
the company's revenues are generated outside the United States.
Nordson has nearly 3,600 employees worldwide and has principal
manufacturing facilities in Alabama, California, Georgia, Ohio,
Rhode Island, Germany, The Netherlands, and the United Kingdom.
*Nordson Corporation
100 Nordson Drive
Amherst, OH 44001
USA
Tel: +1 (440) 985 4000
+1 (440) 988 9411
Fax: +1 (440) 985 1683
E-mail: automotive@nordson.com
http://www.nordson.com
#
Palm Labs, Inc. - Manufacturer of quality industrial adhesives - a
new family of cyanoacrylates designed for the industrial, medical
and consumer industries.
John Fontana's experience in the business community goes back to
1965 where he was part of the Olivetti team. In 1971, Mr. Fontana
started his own Chemical Specialty Company. With borrowed funds he
developed a significant management team and soon became a force in
the specialty chemicals for the plumbing and heating industry.
Industrial Petrolic had rapid growth and soon became a leader in the
industry. His business strategy and marketing capabilities led to
increased sales in 18 consecutive years. In 1990 he sold Industrial
Petrolic Corp.
Palm Laboratories was formed in 1989 for the purpose of producing
and marketing cyanocrylates. At Palm Labs he put together an
outstanding management team.
The original purpose of the formation of Palm Labs was to fit into a
definite market opening and develop a new family of cyanoacrylates
designed for the industrial, medical and consumer industries.
Palm Labs has focused its research and development on the new
exciting Cyanoacrylate, particularly its benefits in the field of
medicine.
In Europe and Canada, the medical establishment is now using
Cyanoacrylates in sutureless skin closures. This development looks
exceptionally promising, however, we need to undertake extensive
efforts in clinical testing. FDA approval is needed and it can be
accomplished with extensive testing and presentation. The benefits
of using Butyl Cyanoacrylate are many: less trauma, higher
mechanical strength, and the use of a local anesthetic is not
required.
In addition to the Medical benefits of the product, research and
development can be done in many industrial areas - such as High
Temperature Cyanoacrylates which can be used in automotive aluminum
engines. At this time we are very close to the development of
Cyanoacrylate Styrene, a high temperatures Cyanoacrylate, which can
open up a multitude of possibilities.
*Palm Labs, Inc.
200 Professional Building
New Orleans Road
Hilton Head Island
South Carolina 29928
USA
Tel: +1 (843) 686-2345
Fax: +1 (843) 686-2230
E-mail: info@palmlabsadhesives.com
http://www.palmlabsadhesives.com
#
Polytek Development Corp. - Producer of liquid rubbers and plastics
for molds and castings. Includes a selection of waxes, release
agents, epoxy plastics, polyeurethane products, and instructional
materials.
Polytek Development Corp. manufacturers the most complete and
versatile lines of liquid mold rubber, casting resin and other
specialty molding and casting compounds. Pourable, brushable and
sprayable urethane rubber, RTV silicone rubber and latex systems
range in hardness and flexibility from very soft to extremely firm.
Product lines of urethane resin, urethane foam, epoxy plastic,
alginate and wax along with all necessary accessories, mold release
agents, training videos and seminars are available from Polytek.
Individual artists, sculptors, hobbyists, model makers as well as
high-volume industrial users rely on Polytek products to accurately
mold and reproduce parts quickly, consistently, and cost-
effectively. Polytek liquid rubber products can be poured, brushed
or sprayed to create a flexible rubber mold that reproduces every
detail from the original master allowing the most complex and
detailed objects to be cast and removed with ease. Polytek liquid
plastics can be used to create perfectly detailed resin castings,
mold shells, prototype parts and decorative objects of virtually any
size and shape.
Polytek mold rubbers and plastics are used for numerous applications
including architectural restoration, bronze art foundry and
industrial foundry casting, ornamental/ decorative concrete and
architectural precast concrete casting, plaster casting, candle mold
making, rapid prototyping, decorative home décor production, stamped
concrete texturing, special effects, model making and movie prop
development, theme park display manufacturing and much, much more.
Uses for our products are as limitless as your imagination.
*Polytek Development Corp.
55 Hilton Street
Easton, PA 18042
USA
Tel: +1 (610) 559-8620
Fax: +1 (610) 559-8626
E-mail: sales@polytek.com
http://www.polytek.com
#
RCD Corporation - Manufacturer of sealant and adhesive products,
including mastics, for the HVAC industry.
Our products provide energy efficient homes, apartments, offices,
schools, hospitals, commercial and industrial buildings by
preventing heat gain or heat loss by sealing leaks, gaps, or
intrusions in conditioned spaces. Typical residential air ducts leak
over 5% of their conditioned air. What’s even worse - commercial and
institutional buildings leak over 10% of their conditioned air!
RCD Mastics are carefully formulated to provide permanent, air
tight, flexible, and weather resistant repairs and installations on
air ducts, thermal insulation, and in conditioned spaces.
*RCD Corporation
2850 Dillard Road
Eustis, FL 32726
USA
Tel: +1 (352) 589 0099
E-mail: info@rcdcorp.com
http://www.rcdmastics.com
#
SAF-T-LOK International Corp. - U.S. manufacturer of anaerobic
adhesives and sealants, cyanoacrylates "instant glue", anti-seize
and lubricants.
With world standards demanding ever improving performance, SAF-T-LOK
was founded in 1983 to fill this industry need and specifically
provide the highest quality precision
engineered adhesives and sealants. In a phrase "Performance by
Design".
In fact, SAF-T-LOK has energized the patent technology and
development work of acquisition companies that pioneered this field
as far back as 1962 in a metamorphosis to the young, fast growing
and responsive company that it is today.
As an ISO-9000 certified firm, SAF-T-LOK Chemical Corporation's
quality adhesive/sealants and manufacturing capability represents
the new standard for this industry. With global objectives in mind,
an internationally recognized auditing company was chosen for
certification. The capability to provide industry needs is clearly
documented by having received the highest quality rating possible,
ISO-9001. An integral part of this world class certification is the
SAF-T-LOK commitment to continuous improvement in every element of
its business.
SAF-T-LOK goes beyond the typical corporate objectives as
indicated in the company "Quality Statement". Each member of the
SAF-T-LOK team will strive not only to meet, but to "exceed
customers expectations."
With the growth rate of emerging economies far outpacing that of
the western world SAF-T-LOK was early to recognize the potential for
assembly regions and as the lights are turned out at the end of the
day in America, the lights are being turned on in a nonstop market
development and product innovation cycle with our customers
elsewhere in the world.
*SAF-T-LOK International Corporation
300 Eisenhower Lane North
Lombard, Illinois 60148
USA
Tel: +1 (630) 495-2001
Fax: +1 (630) 495-8813
E-mail: jws@saftlok.com
sales@saftlok.com
http://www.saftlok.com
#
Sika USA Industry Website - Sealing and bonding solutions for
trucks, bus, marine, auto glass, metal buildings, equipment.
Sika Corporation Industry Products Division is a technology leader
in elastic bonding and in the manufacture of adhesives, sealants and
acoustic materials serving Transportation, Industrial, Marine, and
Automotive Aftermarket.
Product lines include polyurethane adhesives and sealants, hot melt
adhesives, epoxies, acrylics, and butyl sealants. Sika Industry
provides application solutions for the appliance, automotive glass
replacement, HVAC, metal building, truck, rail, RV., specialty
vehicles, marine and window & door industries.
Contact Sika Industry for your sealing, bonding and acoustic
application solutions to meet your business needs and your choice of
bonding technology to meet your manufacturing needs.
*Sika USA Industry Website
Madison Heights, MI
USA
E-mail: obtree@sikasolutions.com
http://www.sikasolutions.com
#
Slocum Adhesives Corporation - Manufacturers of adhesives and
primers for industries including shoe, boat, automotive, HVAC,
packaging and many others. Specializing in custom-compounded
adhesives.
For over fifty years, Slocum Adhesives has been a leader in adhesive
manufacturing. Our commitment to quality has enabled us to remain at
the forefront of the industry. Modern production facilities provide
us the capability to manufacture solvent-based, water-based, and hot
melt adhesives for a wide variety of speciality applications.
Supplying quality adhesives, primers, and cleaners to such diverse
industries as shoe manufacturing, boat building, HVAC, packaging and
many others, we are able to custom-compound an adhesive to suit your
specific needs.
*Slocum Adhesives Corporation
2500 Carroll Ave
Lynchburg, VA 24501
USA
Tel: +1 (434) 847-5671
Fax: +1 (434) 846-244
E-mail: slocum@slocumadhesives.com
http://www.slocumadhesives.com
#
SUR-LOK Adhesives - Manufacturer of anaerobic and cyanoacrylate
adhesives: threadlocker - retainer - sealant - super glue.
*Sur-Lok Corporation
Walworth Wisconsin, 53147
USA
Fax: +1 (262) 275-5080
E-mail: sales@surlok.com
http://www.surlok.com
#
Tangent Industries, Inc. - Develops and manufactures UV-curable
formulations for adhesives, sealants, coatings, and encapsulants.
Specialized applications include glass-to-glass bonders, plastic
bonders, dissimilar substrate bonders and USP Class VI approved for
medical devices.
Tangent Industries, Inc. is a research and manufacturing company
concentrating on applying the technology of ultra-violet (UV)
curable chemistry. Our product line is constantly expanding as we
continually develop new products to meet the needs of our customers
throughout the world. We strive to offer creative solutions to
unique problems. As a result, our growing product line includes many
formulations that are not available elsewhere. Applications for our
products include adhesives, coatings, sealants and encapsulants. Our
highly focused technology answers the demand for increased
productivity. UV-curable systems are fast!
Our chemistry has many applications providing adhesion to substrates
that are considered difficult bonding surfaces; substrates such as
glass, stainless steel, and most plastics. Some of the industries
that can benefit from the characteristics of UV-curable systems are:
Automotive Electronics
Construction Glass Art
Consumer Goods Medical
Converting Printing.
*Tangent Industries, Inc.
227 Rockwell St., P.O. Box 525
Winsted, CT 06098-0525
USA
Tel: +1 (860) 738-7449
Fax: +1 (860) 738-2961
E-mail: info@tangentindinc.com
http://www.tangentindinc.com
#
TechFilm, Inc. - Manufactures epoxy adhesive films and preforms for
electronics and other industrial applications.
TechFilm manufactures epoxy adhesive films and preforms. The epoxies
are B-staged thermoplastic or thermosetting materials that are
available both supported and unsupported. Other materials utilized
include epoxy/urethane, thermoplastic polyester, and polyimide
thermosetting resins.
Support materials include glass, nickel or carbon fibers as well as
Kapton or polyester films. Adhesives are available with electrically
conductive, thermally conductive or general insulating properties.
We provide both standard and custom developed products that will
meet your application requirements.
TechFilm preforms and film adhesives are used in many industries for
product assembly and manufacturing, including aerospace, automotive,
computers, consumer electronics, defense systems, fiber optics,
marine electronics, optics and telecommunications.
TechFilm products have many uses in manufacturing including BGA
packages, circuit boards, EMI shielding, enclosures, hybrid
microelectronics assemblies, laminating films, semiconductor
packaging and devices, smart cards, substrate attach and many other
high performance industrial products. Adhesive films and preforms
offer a convenient and cost-effective alternative to liquid
adhesives.
TechFilm offers custom application of adhesives and lamination of
customer supplied components.
*TechFilm, Inc.
103 Foster Street
Peabody, MA 01960
USA
Tel: +1 (888) 832-4345
+1 (978) 531-9849
Fax: +1 (978) 670-4956
E-mail: information@techfilm.com
customerservice@techfilm.com
sales@techfilm.com
http://www.techfilm.com
#
U.S. Adhesives Co. - Manufactures and formulates adhesives (water-
based resins, dextrins, animal glue and hot melt) for bookbinding,
pressure sensitive, lampshade, tape, and sample book industries.
U.S. Adhesives is a manufacturer and formulator of a wide range of
adhesives including hot melt, water based resins, dextrine and
animal glues.
We have an established product line to meet the needs of a variety
of industrial applications. We are willing to custom formulate to
meet your special situations. Our wide range of mixing equipment
allows us to provide specialty adhesives in small or large
quantities.
U.S. Adhesives is a family owned business founded in 1937 and have
been at our present location since 1960. Our commitment to quality
and customer service for both national and international accounts
has kept us at the forefront of the industry.
*U.S. Adhesives
1735 W. Carroll Ave.
Chicago, IL 60612
USA
Tel: +1 (312) 829-7438
Fax: +1 (312) 829-9733
E-mail: info@usadhesive.com
http://www.usadhesive.com
#
Valley Forge Tape & Label Co., Inc. - Manufacturer of custom printed
self adhesive labels. Suppliers of adhesives, pressure sensitive
adhesives and adhesive tape.
Since 1962, Valley Forge Tape & Label, a family owned business, has
stood for quality and service unsurpassed in the label industry. We
are a full service, electronic-prepress, custom-design label
manufacturer.
Our size and experience provide our clients with consistent, high-
quality labels that have earned numerous awards for excellence in
printing and manufacturing.
We produce prime-quality custom printed labels for our customers,
leaders in the Healthcare, Food and Beverage, Consumer Product and
OEM industries.
*Valley Forge Tape & Label Co., Inc.
119 Summit Drive
Exton, PA 19341-2889
USA
Tel: +1 (800) 345 1323
Fax: +1 (610) 524 8906
E-mail: vfsales@vftl.com
http://www.vftl.com
#
Valpac, Inc. - Manufactures industrial coatings and adhesives.
Products include laminating, pressure sensitive, heat seal and cold
seal adhesives.
VALPAC adhesives have been successfully utilized by a wide cross
section of industries for over 15 years. Our strategic mid-Atlantic
location in Federalsburg, Maryland has offered easy shipping to
customer locations nationwide.
VALPAC has recently moved administrative offices and R&D labs to our
new corporate headquarters. The new site includes a 40,000 square
foot building for the manufacturing of our water-based adhesives,
and a newly constructed building designed and engineered
specifically four the manufacture of our solvent-based products.
VALPAC's products are custom-formulated to solve industrial problems
and offer industrial OEM customers many types of adhesives. VALPAC
manufacturing facilities are outfitted with equipment to provide
customers with superior production capabilities. Our technical
expertise offers customers a wide range of bond characteristics.
*VALPAC, Inc.
1400 Industrial Park Road
Federalsburg, MD 21632
USA
Tel: +1 (410) 754-7390
Fax: +1 (410) 754-7541
E-mail: valpac@valpac.com
http://www.valpac.com/main.htm
Internet guide
Art
| Business | Computer | Debt | Domain names | Finance | Health | Games | Home | Insurance | Jobs | Mortgage | News | Recreation | Science | Shopping
Sports | Travel | Webhosting | Webmasters
