Agriculture - Import and export
products
In 1972, a northern Wisconsin logger
named Pat Crawford patented a tree
cutting shear and began looking for a cost-effective machine to mount it on.
His first attempt was to modify a Timberjack 404 skidder by reversing the
operator's seat and installing the shear on a boom.
Pat then purchased a Drott excavator feller-buncher in 1975 and used it for
four years. Most of his logging jobs were in national forests and tight
selective cuts were becoming very common. The Drott had a large
counterweight and a long tail swing which made it almost impossible to
selective cut without damaging standing trees. To solve this problem, Pat
designed a new boom geometry.
A small 6,000 sq. ft. shop was built in Shawano, Wisconsin where the first
production Timbco Hydro-Buncher was built and sold.
The new boom geometry located the boom and lift cylinder pivots well behind
the center of a rotating turntable. This made the boom's mass act as a
counterweight, eliminating the large parasitic counterweight and tail swing.
The boom also knuckled over the cab making it possible to cut a tree right
next to the machine and then swing with the tree while staying almost within
the machine's width. The new boom could also be extended vertically to
delimb a tree from the top down.
Initially, the new boom geometry was installed on a rubber-tired machine
with side-to-side cab leveling, but hydraulic problems meant replacing the
tires with tracks. A patent was filed on this machine in February, 1980 and
another patent with additional claims was issued in April, 1986. With the
success of this first machine Pat asked Larry Klement, who had helped build
the machine, to become his partner... Timbco Hydraulics, Inc. was formed. A
small 6,000 sq. ft. shop was built in Shawano, Wisconsin where the first
production Timbco Hydro-Buncher was built and sold in July, 1980.
In January, 1982, Timbco was challenged to build a 4-way cab leveling
machine. With this challenge, Timbco produced its first 4-cylinder, 4-way
cab leveling machine in only three months. This new machine was introduced
in April, 1982 at the Intermountain Logging Show in Spokane, Washington. The
design was a huge success and approximately 600 of the 4-cylinder, 4-way cab
leveling machines were eventually built.
Timbco redesigned the machine again in 1987 to an engine-up configuration
with the 4-cylinder cab leveling being abandoned for a much improved 2-
cylinder design. This new generation T400 Series Hydro-Buncher has proven to
be an even greater success. The new T400-D Series Hydro-Bunchers now offer
even more improvements such as lighter and stronger boom construction, an
entirely new electrical system, and a 20% increase in cooling capacity.
Since its beginning, Timbco has expanded five times and as of June, 1999 has
produced over 1,800 T400 Series Hydro-Bunchers. Timbco is continuously
testing designs for new products like the TF800 Series Hydro-Skidders
introduced in 1996.
The "Timbco family" still numbers just under fifty employees, all proudly
supplying products to loggers around the world. Timbco is a company whose
success is built on innovation, integrity, and remaining close to the
logging industry. Being founded by loggers, we believe all loggers have a
very basic need... equipment that is simple, easy to service and maintain,
and has the flexibility to "fit" into their operation. Whether it be on
steep slopes, in wet swamps, in tight selective cuts, or with any cutting
attachment... Timbco products have, and always will, fulfill that need.
*Timbco Hydraulics, Inc
PO BOX 516
1075 Airport Drive
Shawano, WI 54166
USA
Tel: +1 (715) 254 2820
Fax: +1 (715) 256 2347
http://www.timbcohyd.com
#
As a wholly owned subsidiary of the Oldenburg Group, a Milwaukee, Wisconsin,
based diversified industrial manufacturing company, Oldenburg Lake Shore
operates two world class manufacturing plants in Michigan and Wisconsin,
plus a state-of-the-art engineering design and administration facility in
Michigan. The company provides total customer support from design through
delivery, logistics and worldwide field service. Oldenburg Lake Shore serves
wide ranging global industries including shipbuilding, forest products,
mining, automotive and aerospace, pulp and paper, and various commercial
subcontracting.
Tracing its beginnings to 1858, Oldenburg Lake Shore has evolved from a
regional manufacturer of mining and shipboard cargo equipment to what is
today a major manufacturing and engineering company providing products and
services to a wide variety of domestic and international customers.
It is Oldenburg Lake Shore's corporate goal to continue to provide products
which incorporate leading edge technology, designed and manufactured to
world class quality standards, which enhance the profitability of our
customers.
Innovative engineering and design capabilities, comprehensive marketing and
customer support, strict quality assurance, and overall manufacturing
flexibility define the Oldenburg Lake Shore culture
*Timberline Lakeshore
P.O. Box 2113, 900 W. Breitung Avenue
Kingsford, MI 49802
USA
Tel: +1 (906) 774 7444
Fax: +1 (906) 774 1505
E-mail: mrossi@oldenburggroup.com
http://www.timberlineequipment.com
#
Missouri Pacific Lumber Co. is a hardwood sawmill that specializes in
steamed, kiln dried, furniture grade American black walnut lumber. We also
produce red oak, soft maple, cottonwood and many other fine Appalachian and
northern hardwood lumber species that are exported throughout the world from
our location in north-central Missouri.
A state-of-the-art band mill provides high quality plain-sawn, rift-sawn,
and quarter-sawn lumber. Missouri-Pacific Lumber also offers other services
including surface and strait line ripping, and veneer logs.
Missouri-Pacific Lumber has a long history of reliable service and superior
quality that is the reason have grown to an 18 million feet annual
production. We operate an inventory of 4,000,000 ft air-dried, 2,000,000 ft.
kiln-dried and have a kiln capacity of 520,000 ft.
*Missouri-Pacific Lumber Company
694 DD Highway
Fayette, Missouri 65248
USA
Tel: +1 (660) 248 3000
+1 (800) 279 7997
Fax: +1 (660) 248 2508
E-mail: info@mopaclumber.com
http://www.mopaclumber.com
#
Manufacturer of municipal, forestry and industrial hose, as well as
speciality products since 1895.
*Niedner
PO Box 38
Norton VT 05907
USA
Tel: +1 (819) 849 2751
+1 (800) 567 2703
Fax: +1 (819) 849 7539
E-mail: sales.niedner@tycoint.com
http://www.niedner.com
#
Manufactures portable fire suppression units.
*PaMaRo, Inc
P.O. Box 907
Cedar Key, FL 32626-0907
USA
Tel: +1 (352) 543 5234
Fax: +1 (352) 543 5235
E-mail: paul@fireskid.com
http://fireskid.com
#
At CW Manufacturing, we are committed to building the absolute best
equipment in the industrial grinding business. Decades ago, we saw the
grinding industry’s need for higher quality tub grinders, and we have been
responding to the wants and needs of the industry ever since. When it came
to industrial wood grinding, we started from the ground up with a specific
goal to take on the toughest applications. We knew that our goal would drive
us to manufacture the most reliable, highest capacity grinders, and we did
it with the creation of HogZilla.
HogZilla grinders are designed and continuously improved to remain a cut
above all others. CW now manufactures ten standard HogZilla models ranging
from mid-sized to MASSIVE including self-propelled track driven and self-
loading units. We pride ourselves on staying ahead of the customer’s needs,
and a HogZilla is built to have top quality every day standard features that
will out-perform the extra-cost upgrade options offered by other
manufacturers. In addition to HogZilla’s amazing standard features, we
always help our customers make sure that their HogZilla is built to meet and
exceed their own special needs.
This philosophy along with customer driven service is why a HogZilla has
amazing resale value after continuous years of grinding and thousands of
hours of operation. Despite exposure to extreme conditions as they handle
the most difficult applications, no HogZilla has ever been worn or damaged
beyond repair. In addition to the relentless operation of our machines,
customers appreciate our knowledgeable and committed service staff. We want
every customer to know that they can always rely on us for support. In
today’s world, the ethics of our organization are often complemented.
We know that the relationship with our customers is a partnership. CW wants
to get to know you and help to grow your business. We can assist you in
deciding which grinder size and style best meets your needs. We are glad to
review new and used equipment options, and we can help you to establish new
and beneficial contacts within the grinding industry. If you are in or
planning to start a grinding related business, contact us.
*CW Manufacturing
14 Commerce Drive
Sabetha, KS 66534
USA
Tel: +1 (785) 284 3454
Fax: +1 (785) 284 3601
E-mail: hogzilla@mewlan.com
http://www.tub-grinder.com/Home.html
#
DuraTech Industries International, Inc. (originally Haybuster Manufacturing)
was established in 1966, and was initially located in Minot, North Dakota.
The founder of the company, Joe Anderson was a rancher and farmer who
recognized the benefits of grinding hay for his livestock herd. However, the
grinders then available were much too large and too expensive for the
average rancher or farmer. Consequently, Joe decided to build a tub grinder
that would better fit the agricultural application, thus beginning J&J
Manufacturing which was subsequently named Haybuster manufacturing company.
In the early 1970's, Haybuster was relocated to a larger facility in
Jamestown, North Dakota where extra emphasis was placed on expanding the
company's product line. During this time, several additional hay processing
and handling equipment products were developed. Additionally, other
agriculturally related products were developed by Haybuster, including "no-
till" drills, undercutters, and rock pickers.
In the late 1980's, Haybuster focused its innovative expertise toward
development of an industrial line of products, as the need for recycling and
composting emerged, and demand for industrial tub grinders increased. Thus,
with over thirty years' experience in manufacturing tub grinders, Haybuster
expanded into the industrial market with its more rigorous and demanding
product requirements (which led to the present Duratech Industries
International, Inc.). Today, the industrial product line includes a full
range of heavy-duty industrial tub grinders ranging from an 8' utility unit
to a large 12' high output unit to the Grindmaster Line of Horizontal Ram-
Fed Grinders. Also provided are a multitude of custom options to meet unique
customer requirements.
Currently, DuraTech Industries markets approximately 20 standard products
through its dealer networks. These two networks of over 600 dealers
worldwide include reputable industrial distributors and agricultural
implement / equipment dealers who service the diversity of products offered.
Duratech Industries International Inc, today is a respected equipment
producer in the global marketplace, offering products which have a
reputation for being durable and built to exceed market expectations of high
value for the dollars expended. These quality-built units offer today's busy
operator new and better cost-effective methods for performing their many and
varied functions.
The management and stockholders are committed to continuing the excellence
of DuraTech Industries history by constantly developing products to meet new
challenges for the industries and customers served. Internal staffing
increases and manufacturing asset investments are ever-present and ongoing,
as the commitment to meet worldwide demands continues as a primary corporate
goal. The history of DuraTech Industries reflects innovation and quality...
And our future growth goals are based on these same standards to insure both
product and service excellence worldwide.
*DuraTech Industries International, Inc
P.O. Box 1940
Jamestown, ND 58401
USA
Tel: +1 (701) 252 4601
Fax: +1 (701) 252 0502
E-mail: service@duratechindustries.net
http://www.dura-ind.com
#
Manufactures 6 air operated post drivers & 2 post pullers.
*Rhino Tool Company
620 Andrews Avenue, PO Box 111
Kewanee, Illinois 61443
USA
Tel: +1 (866) 707 1808
+1 (309) 853 5555
Fax: +1 (309) 856 5905
E-mail: customercare@rhinotool.com
http://www.rhinotool.com
#
Manufacture a range of blower trucks for landscaping, erosion control,
seeding, and turf topdress. Features product specifications and
applications.
*Express Blower
1275 Bailey Hill Road
Eugene, Oregon 97402
USA
Tel: +1 (541) 434 7100
Fax: +1 (541) 349 8161
E-mail: info@expressblower.com
http://www.expressblower.com
#
Manufacturing of products for agriculture and for ag industry on the farm.
Developing additional farm income.
*Koch Manufacturing
HCR 2 Box 15
Gann Valley, SD 57401
USA
Tel: +1 (605) 293 3430
+1 (800) 822 3430
E-mail: hdkoch@midstatesd.net
http://www.kochmanufacturing.com
#
Powder River manufactures livestock handling equipment for cattle, horses,
bison, swine and rodeo - Since 1938, Powder River has led the way.
*Powder River Livestock Handling
Equipment
P.O. Box 50758
Provo, UT 84605
USA
Tel: +1 (800) 453 5318
Fax: +1 (801) 377 6927
E-mail: info@powderriver.com
http://www.powderriver.com
#
Manufacturer of horse, cattle, flatbed and utility trailers. Located in
Knoxville, TN, USA.
*Circle M Supreme Manufacturing Co. Inc
1810 Lovell Road
Knoxville Tennessee 37932
USA
Tel: +1 (865) 693 1783
Fax: +1 (865) 691 3467
E-mail: csupremem@aol.com
http://www.circlemsupreme.com
#
Aluminum Horse trailer Quality, Galvaneal Steel Price. This manufacturer in
North Carolina specializes in living quarters trailers and direct sales to
the customer features online credit application, inventory listing and
detailed pricing.
*Double D Distributors, Inc.
Pink Hill, NC 28572
USA
Tel: +1 (800) 435 6274
Fax: +1 (252) 568 4958
E-mail: dddist@eastlink.net
http://www.doubledtrailers.com
#
Manufacturer of steel frame, aluminum skin horse trailers. Located in Ocala,
Florida.
*Trailers USA
13233 North US Highway 27
Ocala, Florida 34482
USA
Tel: +1 (352) 351 4019
E-mail: peteymaxx@aol.com
http://www.trailers4horses.com
#
Ofab heavy-duty brush cutters are made from the highest quality materials
and components available. Ofab's history of manufacturing parts for the
specialty and emergency response vehicle industry means that our rotary
cutters are designed and manufactured to exacting tolerances with the
highest level of workmanship and quality.
Ofab rotary cutters are not for everyone. If you make a living clearing
heavy brush and put hundreds or thousands of hours on a rotary cutter per
year, and if you feel reliability and trouble-free operation are important,
then Ofab is the rotary cutter for you. Ofab does not make inexpensive
rotary cutters; however, in the long run our product will cost you less than
other so-called inexpensive rotary cutters.
*Ofab rotary cutters
2817 NW 8th PL
Ocala FL 34475
USA
Tel: +1 (888) 878 5882
Fax: +1 (352) 629 7931
E-mail: info@ofab.net
http://www.dura-deck.net
#
The history of pacific/hoe is really the history of two companies: Pacific
Saw & Knife Company, and R. Hoe & Company, Inc. These two companies, founded
nearly 150 years apart, shared a common desire to constantly improve their
products and manufacturing processes.
R. Hoe & Co., Inc. was founded during the second term of President Thomas
Jefferson in New York. At that time R. Hoe & Company manufactured the first
production printing presses in America.
Saw manufacturing began as a sideline. Hoe needed saws capable of cutting
the heavy mahogany used for construction of printing press side frames and
bases. This led to a growing business producing commercial saw blades. At
one time, R. Hoe & Company was the world's largest manufacturer of bits and
shanks and chisel tooth saws.
Pacific Saw & Knife Company began as a small saw repair and distribution
business in Portland, Oregon in the late 1940's. One of the first companies
to experiment with carbide on the periphery of circular saw blades, Pacific
Saw & Knife Company prospered and grew to have manufacturing plants in both
Portland, Oregon and Decatur, Georgia, as well as branch operations
throughout the country and in Canada. Always eager to explore innovative
ideas and technologies, Pacific Saw & Knife Company has a string of "Firsts"
in its long history: First carbide saw production, First patented accu-
ground tipping, First licensee of strob saws and First to introduce the
strob saw to the world. First production laser and more recently, the First
(patent pending) full face contact spline arbor.
In 1984 Pacific Saw & Knife Company purchased R. Hoe & Company to become one
of the largest saw and knife manufacturers in the world. Today Pacific/Hoe
Saw & Knife Company continues its long tradition of innovation and
excellence in manufacture to provide its customers with the finest saws,
knives and paper mill blades available anywhere.
*Pacific/Hoe
2700 SE Tacoma Street
Portland, Oregon 97202
USA
Tel: +1 (503) 234 9501
Fax: +1 (503) 234 3506
E-mail: sales@pacific-hoe.net
http://www.pacific-hoe.com
#
At Praxis, we know what goes into building the best portable stump grinders.
We know it takes more than just welding together the highest grade American
steel and using the highest quality components.
It means that from the ground up, Praxis is devoted to producing machines
with outstanding craftsmanship. Together with the pride that goes into every
machine, we provide our customers with unmatched service. At Praxis, we
build stump grinders with the strength and dependability to handle many
years of your toughest jobs.
*Praxis Illinois Corporation
733 Enterprise Avenue
DeKalb, Illinois 60115
USA
Tel: +1 (888) 316 8200
+1 (815) 787 6644
Fax: +1 (815) 787 3819
E-mail: info@praxisillinois.com
http://www.stumpmachine.com
#
Allied Tube & Conduit has been making high quality, galvanized steel tubing
for over 40 years. During these years we have grown significantly,
introduced many new products, improved our processes and helped our
customers meet their demands time and time again.
Our products serve the following markets:
Electrical Conduit,
Mechanical Tubing,
Fire Protection Sprinkler Pipe,
Chain Link Fence Framework,
Telespar square sign supports for the traffic industry,
Razor Ribbon brand barbed tape for the security industry,
Fablok segmentally welded fittings for the mechanical market.
Our tube manufacturing locations are in Harvey (Chicago), IL., Philadelphia,
PA, Phoenix, AZ, Pine Bluff, AR, DePere, WI (Tectron Division) and Kokomo,
IN,
Our signature Flo-CoatŪ process produces galvanized tube and pipe considered
the "Industry Standard" in each of the above core markets.
*Allied Tube & Conduit
16100 S. Lathrop Avenue
Harvey, IL 60426-6021
USA
Tel: +1 (800) 882 5543
Fax: +1 (708) 339 2399
E-mail: info@alliedtube.com
http://www.alliedtube.com
#
Amazing Gates of America LLC began in 1990 as an automatic gate contracting
company in Santa Fe, New Mexico USA, designing and installing hand crafted
custom gate systems locally. Through research and field testing, we
developed many of the techniques now given away freely on this website. In
New Mexico we have grown to be the largest installer of automatic gates in
the Albuquerque Metro Area.
Six years ago we put our years of field experience into the brand new
concept of shipping automatic gate packages factory direct to building
contractors and "Do It Yourself" homeowners. We do all the welding, drilling
and painting or powder coating in our shop and ship the entire package to
your home or jobsite. The "Gate Pak" concept is original and unique to
Amazing Gates and the access controls equipment we feature have been tested
and re-tested by our Field Installation Division for reliability and safety.
Market response has been tremendous and we now have an international as well
as national presence with our Gate Pak. We are the originators of the Pre-
Hung Automatic Gate.
*Amazing Gates of America
608 Tierra Montana Loop
Bernalillo, New Mexico 87004
USA
Tel: +1 (505) 771 8777
+1 (800) 234 3952
Fax: +1 (505) 771 8999
E-mail: answers@amazinggates.com
http://www.amazinggates.com
#
Boundary Fence & Railing Systems, Inc. was founded in 1947. We are
manufacturer, distributor, and wholesalers for wide variety of fencing
products. We manufacture and wholesale commercial, residential, security
fencing & railing systems. Whether it is PVC, Chain Link, Ornamental Steel,
iron or Aluminum, Wood or Bamboo fencing. We have a wide variety of standard
and custom made design to suit your clients requirement. At Boundary we
guarantee you reasonable price & excellent service. Boundary also
manufactures and wholesales digitally operated remote control Boulevard,
gates and various mechanical and electrical tools required by the
architectural and construction industries.
*Boundary Fence and Railing Systems
131-02 Jamaica Avenue,
Richmond Hill, NY 11418
USA
Tel: +1 (800) 628 8928
+1 (718) 847 3400
Fax: +1 (718) 805 9816
E-mail: boundary.fence@verizon.net
http://www.boundary-fences.com
#
Allan Akins in Winnipeg, Manitoba, Canada started HiQual Manufacturing, in
1978. Allan's goal was to provide greater value to the livestock producer
with innovative new products that better met their needs, while maintaining
a level of quality that was unsurpassed in the industry.
However, production and design are only half of the equation that has made
HiQual the largest manufacturer of livestock equipment in Canada. The other
half was a unique marketing perspective. Allan looked at the various
retailers in Canada and decided that a high-quality, innovative product
required a strong, customer oriented distribution system. Thus began
HiQual's relationship with the co-operative system. By offering an exclusive
product to two major Canadian co-operatives, including United Farmers of
Alberta, Allan was able to create a partnership that provided the livestock
producer with the best possible product and the highest level of customer
service. Masterfeeds distributes HiQual in southern Saskatchewan while
independent dealers do the same in northern Saskatchewan, Manitoba, Ontario
and British Columbia. The Canadian customer base rapidly changed to value
based investors from price driven consumers. HiQual has achieved more than a
40% market share in Canada.
Today HiQual has two manufacturing facilities, one in Winnipeg, Manitoba and
the other in Rapid City, South Dakota. Our U.S. co-operative partner is
Heritage Trading. In Canada and the United States we now have over three
hundred qualified dealerships.
We feel that our greatest strength is our research and development of new
and innovative products. We use the advice of our co-operative partners and
their customers to ensure that our efforts are directed towards the most
important needs of the livestock producers and owners. A strong focus on new
products will continue to be a benchmark for HiQual Manufacturing.
HiQual is committed to our co-operative partners, and together we can offer
their customers the highest quality of innovative products, and a level of
customer service that is unique in the industry. The end result is greater
value for the producer.
*8HiQual Manufacturing
3139 Creek Drive
Rapid City, SD 57703
USA
Tel: +1 (605) 343 1234
Fax: +1 (605) 348 6618
http://www.hi-qual.com/index.html
#
Manufacturers of farm and ranch products.
*Hutchison Western Farm and Ranch Supply
7460 Highway 85
PO Box 1158
Adams City, CO 80022
USA
Tel: +1 (303) 287 2826
+1 (800) 525 0121
Fax: +1 (303) 289 3286
E-mail: info@hutchison-inc.com
http://www.hutchison-inc.com
Next page
Internet guide
Art
| Business | Computer | Debt | Domain names | Finance | Health | Games | Home | Insurance | Jobs | Mortgage | News | Recreation | Science | Shopping
Sports | Travel | Webhosting | Webmasters
